Computational Systems Biology Main Page

From "A B C"
Jump to navigation Jump to search

Computational Systems Biology

Course Wiki for BCB420 (Computational Systems Biology) and JTB2020 (Applied Bioinformatics).


 

This is our main tool to coordinate information, activities and projects in University of Toronto's computational systems biology course BCB420. If you are not one of our students, this site is unlikely to be useful. If you are here because you are interested in general aspects of bioinformatics or computational biology, you may want to review the Wikipedia article on bioinformatics, or visit Wikiomics. Contact boris.steipe(at)utoronto.ca with any questions you may have.


 

If you are enrolled in this course but have not been subscribed to the mailing list, or do not have an account on the Student Wiki, please contact me immediately.


 


 


 

BCB420 / JTB2020

These are the course pages for BCB420H (Computational Systems Biology). Welcome, you're in the right place.

These are also the course pages for JTB2020H (Applied Bioinformatics). How come? Why is JTB2020 not the graduate equivalent of BCB410 (Applied Bioinformatics)? Let me explain. When this course was conceived as a required part of the (then so called) Collaborative PhD Program in Proteomics and Bioinformatics in 2003, there was an urgent need to bring graduate students to a minimal level of computer skills and programming; prior experience was virtually nonexistent. Fortunately, the field has changed and our current graduate students are usually quite competent at least in some practical aspects of computational biology. In this course we profit from the rich and diverse knowledge of the problem-domain our graduate students have, while bringing everyone up to a level of competence in the practical, computational aspects.


The 2019 course...

In this course we explore systems biology of human genes with computational means in project oriented format. This will proceed in three phases:

  • Foundations first: we will review basic computational skills and bioinformatics knowledge to bring everyone to the same level. In all likelihood you will need to start with these tasks well in advance of the actual lectures. This phase will include a comprehensive quiz on prerequisite material in week 3. We will explore data-sources and you will choose one data-source for which you will develop import code and document it in an R markdown document within an R package;
  • Next we'll focus on Biocuration: the expertise-informed collection, integration and annotation of biological data. We will each choose a molecular "system" to work on, and define an ontology and data-model in which to annotate our system's components, their roles, and their relationships. The outcome of your curation task (together with your data script) will define the scope of this course's Oral Test;
  • Finally, we will develop tools for Exploratory Data Analysis in computational systems biology. We will jointly develop code for a team-authored R package where everyone contributes one mini workflow for data preparation, exploration and interpretation. Your code contributions to the package will be assessed;
  • There are several meta-skills that you will pick up "on the side" these include time management, working according to best practice of reproducible research in a collaborative environment on GitHub; report writing, and keeping a scientific lab journal.



Organization

Dates
BCB420/JTB2020 is a Winter Term course.
Lectures: Tuesdays, 16:00 to 18:00. (Classes start at 10 minutes past the hour.)
Note: there will be three open-ended collaborative planning sessions that may go well into the night. Attendance and participation is mandatory.
Final Exam: None for this course.
Events
  • Tuesday, January 8 2019: Course officially begins. No class meeting. Get started on preparatory material (well in advance actually).
  • Tuesday, January 15: First class meeting. Mock-quiz for preparatory material.
  • Tuesday, January 22: First live quiz on preparatory material. Later: open ended session on data import
  • Tuesday, February 5: Open ended session on system curation
  • Tuesday, March 12: Open ended session on exploratory data analysis


Location
MS 3278 (Medical Sciences Building).


Departmental information
For BCB420 see the BCB420 Biochemistry Department Course Web page.
For JTB2020 see the JTB2020 Course Web page for general information.



 

Prerequisites and Preparation

This course has formal prerequisites of BCH441H1 (Bioinformatics) or CSB472H1 (Computational Genomics and Bioinformatics). I have no way of knowing what is being taught in CSB472, and no way of confirming how much you remember from any of your previous courses, like BCH441 or BCB410. Moreover there are many alternative ways to become familiar with important course contents. Thus I generally enforce course-prerequisites only very weakly and you should not assume at all that having taken any particular combination of courses will have prepared you sufficiently. Instead I make the contents of the course very explicit. If your preparation is lacking, you will have to expend a very significant amount of effort. This is certainly possible, but whether you will succeed will depend on your motivation and aptitude.

The course requires (i) a solid understanding of molecular biology, (ii) solid, introductory level knowledge of bioinformatics, (iii) a good working knowledge of the R programming language.


 

The prerequisite material for this course includes the contents of the 2018 BCH441 course:

  • <command>-Click to open the Bioinformatics Learning Units Map in a new tab, scale for detail.
A knowledge network map of the bioinformatics learning units.
  • Open the Bioinformatics Knowledge Network Map and get an overview of the material. You should confidently be able to execute the tasks in the four   Integrator Units  .
  • If you have taken BCH441 before, please note that many of the units have undergone significant revisions and material has been added. You will need to review the material and familiarize yourself more with the R programming aspects.
  • If you have not taken BCH441, you will need to work through the material rather carefully. Estimate at least three weeks of time and get started immediately.


 

A minimal subset of bioinformatics knowledge you need to begin with work in BCB420 is linked from the BCB420-specific map below. To ensure everyone is adequately prepared, we will hold a Quiz on the   Live units   on that map in the third week of class. We will hold a mock-quiz on the material in the second week (our first class meeting) so everyone knows what to expect.

  • <command>-Click to open the BCB420 Preparation Learning Units Map in a new tab, scale for detail.
A map of preparatory BCB420 learning units.
  • Hover over a learning unit to see its keywords.
  • Click on a learning unit to open the associated page.
  • The nodes of the learning unit network are colour-coded:
    •   Live units   are green
    •   Units under development   are light green. These are still in progress.
    •   Stubs   (placeholders) are pale. These still need basic contents.
    •   Milestone units   are blue. These collect a number of prerequisites to simplify the network.
    •   Integrator units   are red. These embody the main goals of the course. These units are not for evaluation in BCB420.
  • Arrows point from a prerequisite unit to a unit that builds on its contents.


 


Grading, Activities, Deliverables

 

For details of the deliverables, see below.

 
Activity Weight
BCB410 - (Undergraduates)
Weight
JTB2020 - (Graduates)
Self-evaluation and Feedback session on preparatory material("Quiz"[1]) 20 marks 15 marks
Oral Test (March 7/8) 30 marks 30 marks
Collaborative software task and participation 20 marks 15 marks
Journal 25 marks 25 marks
Insights 5 marks 5 marks
Pull request reviews   10 marks
Total 100 marks 100 marks


 

We are covering a lot of ground in this course, and all deliverables feed into a collaborative project. Everyone's continuous, active participation is essential for making this a success: for you personally and for the class as a team.


 

Getting started

 

Everything starts with the following four units:

This should be the first learning unit you work with, since your Course Journal will be kept on a Wiki, as well as all other deliverables. This unit includes an introduction to authoring Wikitext and the structure of Wikis, in particular how different pages live in separate "Namespaces". The unit also covers the standard markup conventions - "Wikitext markup" - the same conventions that are used on Wikipedia - as well as some extensions that are specific to our Course- and Student Wiki. We also discuss page categories that help keep a Wiki organized, licensing under a Creative Commons Attribution license, and how to add licenses and other page components through template codes.


Keeping a journal is an essential task in a laboratory. To practice keeping a technical journal, you will document your activities as you are working through the material of the course. A significant part of your term grade will be given for this Course Journal. This unit introduces components and best practice for lab- and course journals and includes a wiki-source template to begin your own journal on the Student Wiki.


Academic Integrity is a promise that scholars and scientists world-wide give each other, that we will uphold, protect, and promote ethical and practical standards for our work. Its most basic values are proclaimed as honesty, trust, fairness, respect, responsibility, and courage. These are simple ideas, but in order to give them meaning we need to discuss how these values get translated to the details of our everyday work. Unfortunately, this important topic is often compressed to discussing cheating and plagiarism, to managing procedures to detect dishonesty, and to threatening sanctions. It is overlooked that those are just the manifestations of much deeper problems, and focussing on those symptoms alone perpetuates a stereotyped us-versus-them mentality of educators and students alike that is much more likely to make the problem worse than to solve it. The key to counter this lies in a proper understanding of academic integrity as a relational value, and respect as its foundation.

Discussing academic integrity in the abstract is of limited use, the challenge is to put the concepts in practice, in every aspect of this course and this is not a question of behaviour, but of attitude. The attitude needs to be reflected in the choice of teaching materials, in the care in their preparation, in the attitude of impartiality and reproducibility we bring to our experiments, in mutual trust in class, in fairness in assessments, and honesty in assignments. One everyday issue is attribution and we operate a Full Disclosure Policy for attribution in this course. This means everything that is not one's own, original idea must be identified and properly attributed. Neither I nor you are already perfect in this, but I trust we can come together as a learning community to educate each other and improve.


In paralell with your other work, you will maintain an insights! page on which you collect valuable insights and learning experiences of the course. Through this you ask yourself: what does this material mean - for the field, and for myself.


Once you have completed these four units, get started immediately on the Introduction-to-R units. You need time and practice, practice, practice[2] to acquire the programming skills you need for the course. Whenever you want to take a break from studying R, continue with the other preparatory units.


 

PartI: Foundations and Data

 

Don't forget to document your work in your Journal!


 

Your level of preparedness will be assessed in a "mock quiz" in week two, after which you have one more week to fill in gaps before our Quiz in week three. With that out of the way, we will look at different data sources that are useful in systems biology, including gene-level annotations and collections of experimental data, relationship data like physical and epistatic interactions, and systems-level data like metabolic or regulatory pathways. Each of you will select one data-source in our first open-ended session and then work on the following deliverables:

  • a brief summary page on the Student Wiki: the page needs to be named according to the pattern: User:<your_name>/BCB420-2019-Data_<your_data_resource> and contain the category tag: [[Category:BCH420-2019_Data_project]].
  • an R package derived from rpt,
    • hosted on GitHub,
    • named according to the pattern BCB420.2019.<your_data_resource>[3],
    • containing an R markdown page that describes and annotates code for
      • importing the chosen data in platform-independent function calls (see the footnote for details and restrictions)[4],
      • and cleaning it up where necessary,
      • and normalizing its identifiers to HuGO gene symbols,
    • and containing sample data for our defined reference dataset of genes,
    • and containing a report on the data statistics,
    • and containing code to validate the import process,
    • and containing the (provided) function to display the markdown file.

Required: a user needs to be able to use the information you provided to understand the semantics of the data, import the data, purify it where necessary, and associate it with HUGO IDs in an R data frame. They should be able to use the data as a feature in a machine learning protocol without further preprocessing steps.

To illustrate the requirements with a model solution, I have provided an example project page here, which links to a Github repository with the corresponding package. Studying this with some care will probably clarify many questions.

Note
If your data includes chromosomal coordinates in any way, you must ensure the coordinates are from GRCh38 (hg38).


 

Database choices

 

Here are the chosen (or assigned) databases:


 
Name DB URL Note
Emily Ayala Gene models (exons and chromosomal coordinates) from gencode v29 GTF or Gff3 files https://www.gencodegenes.org/ Alternatively: biomart exons?
Deus Bajaj EGGNOG    
Cathy Cha GEO tissue set: tissue specifc differential expression https://www.ncbi.nlm.nih.gov/geo/ The challenge here is to find a good set of ~ 20 high-coverage experiments, and to apply quantile normalization
Nada Elnour Human Protein Atlas subcellular loc.    
Chantal Ho GEO disease set: expression response to chronic and acute disease states https://www.ncbi.nlm.nih.gov/geo/ The challenge here is to find a good set of ~ 20 high-coverage experiments, and to apply quantile normalization
Judy Lee PDB human proteins via Biomart? PDB? NCBIs MMDB?  
Tina Lee Pfam annotations via Ensembl    
Jian Bin Lin GEO    
Matthew Mcneil COSMIC and GEO - Tissue level correlations    
Gabriela Morgenshtern Awesome (or PANTHER)    
Yoonsik Park Reactome pathway gene sets https://reactome.org/  
Alesandro Rigido MsigDB - compute co-occurrence (in pilot selection) http://software.broadinstitute.org/gsea/msigdb/index.jsp Given two genes: how often do they co-occur in the same MSig Set?
Fan Shen SMART    
Rachel Silverstein Human Phenotype Ontology    
Yiqiu Tang OMIM - gene phenotype associations https://www.omim.org/  
Denitsa Vasileva GO annotations https://www.ebi.ac.uk/GOA  
Rachel Woo Human Protein Atlas Tissue Data    
Alison Wu BioGRID (genetic only interactions only) https://thebiogrid.org/  
Yufei Yang GTRD ChipSeq verified TF binding sites in gene promoter regions http://gtrd.biouml.org/  
Yin Yin huMAP protein complexes http://proteincomplexes.org/  
Han Zhang HitPredict (weighted interaction graph) http://hintdb.hgc.jp/htp/index.html  
Xindi Zhang CORUM complexes http://mips.helmholtz-muenchen.de/corum/  
Yuhan Zhang Encode    
Liwen Zhuang Human Disease Ontology    
Sapir Labes GWAS    
Edward Ho Cosmic    
Edouard Al-chami GEO stimulus set: cell response to external stimuli https://www.ncbi.nlm.nih.gov/geo/ The challenge here is to find a good set of ~ 20 high-coverage experiments, and to apply quantile normalization

Contact me with any questions you may have.


 

Part II: Biocuration

"Systems" are concepts and working with systems requires expert knowledge. To explore principles of expert curation of molecular systems, each of you will select one system in our second open-ended session and then work on the following deliverables:

  • a project page on the Student Wiki
    • that contains information about the system objectives;
    • an annotated list of genes that are system members;
    • an annotated list of related genes that are not system members;
    • annotations according to a "System Roles Ontology";
    • an attached JSON file that can be used to load your system data into a systems database that implements a relational data model for molecular systems;

Your data import script and your system model will be assessed in the Oral Test.


 


Part III: Exploration

At the end of Parts I and II we will have data available and annotated systems that induce relations on the data. Using this information, we can formulate tools for exploratory data analysis (EDA): isolating and evaluating features, looking at correlations, identifying patterns in networks, clustering data etc. Each of you will select one EDA workflow in our third open-ended session for which to build a tool in a jointly authored R package. Your deliverables are:

  • a project page on the student Wiki that contains a specification of your tool;
  • an implementation of your tool as part of a jointly authored R package under continuous integration;
  • a Vignette in the package that describes the tool and includes sample code for which the data is also provided in the package.

Your deliverables will be jointly evaluated, together with your participation in constructing the package.


 

Extensions for term work

 

Extensions for term work in this course are subject to Faculty regulations and will only be considered within the framework determined by the Faculty policies.


  • Regular Submissions
It is Faculty policy to require assessments to be "fair, equitable and reasonable". In order to be equitable, granting extensions requires the student to demonstrate that the need for the extension is due to unavoidable circumstances that go significantly beyond what was expected of the rest of the class. In general "official" documentation will be required: UofT Verification of Illness or Injury Form, Student Health or Disability Related Certificate, a College Registrar’s Letter, and an Accessibility Services Letter.
  • Signing up for the oral tests.
The dates for the Oral Test have been announced at the beginning of the term on this syllabus. If you fail to sign up for a slot, or if you fail to show up at the scheduled time, we apply the Faculty policy for a missed Midterm Test: "if the reasons for missing your test are acceptable to the instructor, a make-up opportunity should be offered to the student where practicable. "Acceptable" reasons will be considered
  • if they are justified,
  • if the consideration is "fair, equitable and reasonable", and
  • if the reason is documented through one of the four types of "official" documentation: UofT Verification of Illness or Injury Form, Student Health or Disability Related Certificate, a College Registrar’s Letter, and an Accessibility Services Letter.
Scope for a "practicable" make-up opportunity for the Oral Test will be limited.
Since the course does not have a final exam, the Faculty requires grades to be marked, collated and submitted a few days after the Template:Lastdate. Therefore I cannot normally grant extensions beyond this date. The Faculty allows so called informal extensions to be granted "in extraordinary circumstances"; in those cases too, the requirement to be "fair, equitable and reasonable" will apply, i.e. you would need to demonstrate that the need for the extension was due to unavoidable circumstances that go significantly beyond what was expected of the rest of the class, and submit "official" documentation to me. In that case, (i) we would determine an adjusted submission date, (ii) I will initially submit a mark of 0 for the missing submissions, and (iii) I will submit an amended mark, after that date, if appropriate. Note that the Faculty requires that such extensions don't go beyond a few days after the end of the Final Examination Period. If you require an extension beyond that date you need to submit a formal petition through your College Registrar.


 

Late penalties

 

Late penalties will be applied according to the following formula: (marks achieved) * 0.5^(fractional days late). However material submitted more than 3.0 days late (72 hours or more) will be marked zero. Note: this does not apply to material due before the Oral Test (see there).


 

Copyright and Licensing

 

We follow [FOSS] principles in this course. You automatically own copyright to all material you prepare. All material must be licensed for free re-use, under the condition of fair attribution. In practice:

All pages that you place on the Student Wiki must include a {{CC-BY}} tag. All documentation within GitHub pages that you prepare for this course must include a Creative Commons License - Attribution (CC-BY), v. 4.0 or later. All code submitted for this course must be licensed under the MIT software license. Unlicensed submissions will have marks deducted and may be removed from the Wiki.


 

Academic integrity

Our rules on Plagiarism and Academic Misconduct are clearly spelled out in this learning unit. This unit is part of our course prerequisites, and everyone documents in their course journal that they have worked through the unit and understood it. Consequences of having to report to the Office of Student Academic Integrity (OSAI) for plagiarism, misrepresentation or falsification include an indelible failing mark on the transcript, a delay in graduation, or not being able to complete your POSt. Please take extra time to clearly understand the requirements, and define for yourself what they mean for every aspect of your work.


 

Marks adjustments

I do not adjust marks towards a target mean and variance (i.e. there will be no "belling" of grades). I feel strongly that such "normalization" detracts from a collaborative and mutually supportive learning environment. If your classmate gets a great mark because you helped them with a difficult concept, this should never have the effect that it brings down your mark through class average adjustments. Collaborate as much as possible, it is a great way to learn. But do keep it honest and carefully consider our rules on Plagiarism and Academic Misconduct.


 

Timetable and contents details

Note: The general outline of the course as described above is current for the 2019 Winter Term. Filling in the activity details below is still in progress.


 

Note: Click on the "▽" - symbol to see details for each week's activities.


 

Part I: Foundations

 
Week In class: Tuesday, January 8 2019 This week's activities
1
  • No class meeting this day!
  • To prepare before next meeting ...
  • study or review ABC learning unit material
  • start or update your User page on the Student Wiki
  • start your course journal

 

Details ...  ▽△

  • You are not submitting learning units for credit, thus you should be able to progress quickly through the material up to the   Milestone units  . But do not skip units.
  • If you have worked with the ABC-units RStudio project before, you need to pull the most recent version from the GitHub repository. Update it from time to time, code will change. If you have not worked with this RStudio project before, make sure you work through the "Introduction to R" units in detail and with great care.
  • Your course journal must contain the following category tag: [[Category:BCB420-2019_Journal]].
  • Your User page must contain the following category tag: [[Category:BCB420-2019]].


 


Week In class: Tuesday, January 15 2019 This week's activities
2
  • First class meeting
  • Review of preparatory materials (you should have worked through all of the materials in preparation for class).
  • Practice quiz on preparations (not for credit)
  • Course overview and Q&A
  • Follow up from class meeting ...

  • To prepare before next meeting ...
  • Get an overview of the the rpt package so you can ask questions next week.
  • Review data sources, you will need to choose one to work on.
  • Review requirements for your data source deliverable. Make sure you can work from it and discuss it in class.

 

Details ...  ▽△

In progress ...
  • You need a GitHub account and you need to have your RStudio client set up to pull from and push to Github hosted projects. See the rpt package for details.
  • Data: our goal is to make data available that can be used for the annotation of curated biological systems. Data types that interest us in principle include:
    • Component annotations: sequence, structure, function (GO), localization ...
    • Component dynamics (time, space, virtual dimensions): expression profiles, modification dynamics, ...
    • Relationships: protein-protein interaction data, metabolic and regulatory pathways, functional associations (STRING), ...
    • Perturbations: cancer genomes, epistatic effects, ...
    • Phenotypes: OMIM, Navigome ...
    • Expert curated sets: MSigDB ...

To be well prepared, you need to understand the various categories of data that are available and have narrowed your choice to two or three datasets for which you know that they fulfill the requirements.

Read:

Grabowski & Rappsilber (2019) A Primer on Data Analytics in Functional Genomics: How to Move from Data to Insight?. Trends Biochem Sci 44:21-32. (pmid: 30522862)

PubMed ] [ DOI ] High-throughput methodologies and machine learning have been central in developing systems-level perspectives in molecular biology. Unfortunately, performing such integrative analyses has traditionally been reserved for bioinformaticians. This is now changing with the appearance of resources to help bench-side biologists become skilled at computational data analysis and handling large omics data sets. Here, we show an entry route into the field of omics data analytics. We provide information about easily accessible data sources and suggest some first steps for aspiring computational data analysts. Moreover, we highlight how machine learning is transforming the field and how it can help make sense of biological data. Finally, we suggest good starting points for self-learning and hope to convince readers that computational data analysis and programming are not intimidating.


 


Week In class: Tuesday, January 22 2019 This week's activities
3

Open ended session:


  • Preparations review Q & A
  • Quiz

  • Choosing a dataset to define an import workflow ...
  • Follow up from class meeting ...
  • Data import
  • Analyze your datasource
  • Define cleanup and normalization needs

  • To prepare before next meeting ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, January 29 2019 This week's activities
4
  • Normalizing gene names
  • Validating datasets
  • Scaling transformations
  • Intro of test dataset
  • Reproducible research aspects


  • Follow up from class meeting ...
  • solve any normalization issues your dataset may have
  • Get your ORCID IDs
  • Prepare your data that relates to the test set
  • Include scaling code, where indicated

  • To prepare before next meeting ...
  • work through literate programming
  • finalize package
  • validate correctness
  • document
  • "Release" your package before Tuesday, February 5 2019 at 16:00[5].
  • Review systems theory
  • Intro to BioCuration

 

Details ...  ▽△

  • TBD
  • ...
  • ...




 

Part II: Curation

 


Week In class: Tuesday, February 5 2019 This week's activities
5

Open ended session:


  • Systems concepts
  • A systems ontology
  • A systems data model
  • Biocuration

  • Choosing your system for a systems curation project ...
  • Follow up from class meeting ...
  • Choose your system

  • To prepare before next meeting ...
  • Begin project page
  • Define observables
  • Begin exploration
  • Start draftin systems architecture

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, February 12 2019 This week's activities
6
  • Brief Milestone I report: system choice and preparatory steps
  • Follow up from class meeting ...
  • ...
  • ...

  • To prepare before next meeting ...
  • ...
  • ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, February 19 2019 This week's activities
  • No class meeting - Reading Week
  • To prepare during reading week ...
  • ...
  • ...


 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, February 26 2019 This week's activities
7
  • Milestone II: report (major progress: you should be nearly done)
  • Follow up from class meeting ...
  • ...
  • ...

  • To prepare before next meeting ...
  • ...
  • ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, March 5 2019 This week's activities
8
  • Milestone III: report (final)
  • A brief overview of Exploratory Data Analysis (EDA) for Systems Biology (overview of materials and outline how to study)
  • Data model of systems data for a shared package
  • Follow up from class meeting ...
  • Finalize curation report
  • Validate

  • To prepare before next meeting ...
  • Curation project deadline
  • Prepare for Oral Tests: March 7/8
  • Study introduction to EDA materials

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 

Part III: Exploration

 


Week In class: Tuesday, March 12 2019 This week's activities
9

Open ended session:


  • Exploratory Data Analysis of Systems data

  • rptPlus and rptTeam
  • Contributing to a team-authored package on GitHub: forks, branches, pull-requests and Continuous Integration
  • Choose your workflow for a team-authored systems EDA package ...
  • Follow up from class meeting ...
  • Study rptPlus and rptTeam documentation
  • ...

  • To prepare before next meeting ...
  • ...
  • ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, March 19 2019 This week's activities
10
  • Vignettes
  • ...
  • Follow up from class meeting ...
  • ...
  • ...

  • To prepare before next meeting ...
  • ...
  • ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, March 26 2019 This week's activities
11
  • ...
  • Follow up from class meeting ...
  • ...
  • ...

  • To prepare before next meeting ...
  • ...
  • ...

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 


Week In class: Tuesday, April 2 2019 This week's activities
12
  • No class meeting this day
  • Deadline for computational tasks to be documented in journal
  • Deadline for all remaining course deliverables

NA

 

Details ...  ▽△

  • TBD
  • ...
  • ...



 




Resources

Course related


 
Miller et al. (2011) Strategies for aggregating gene expression data: the collapseRows R function. BMC Bioinformatics 12:322. (pmid: 21816037)

PubMed ] [ DOI ] BACKGROUND: Genomic and other high dimensional analyses often require one to summarize multiple related variables by a single representative. This task is also variously referred to as collapsing, combining, reducing, or aggregating variables. Examples include summarizing several probe measurements corresponding to a single gene, representing the expression profiles of a co-expression module by a single expression profile, and aggregating cell-type marker information to de-convolute expression data. Several standard statistical summary techniques can be used, but network methods also provide useful alternative methods to find representatives. Currently few collapsing functions are developed and widely applied. RESULTS: We introduce the R function collapseRows that implements several collapsing methods and evaluate its performance in three applications. First, we study a crucial step of the meta-analysis of microarray data: the merging of independent gene expression data sets, which may have been measured on different platforms. Toward this end, we collapse multiple microarray probes for a single gene and then merge the data by gene identifier. We find that choosing the probe with the highest average expression leads to best between-study consistency. Second, we study methods for summarizing the gene expression profiles of a co-expression module. Several gene co-expression network analysis applications show that the optimal collapsing strategy depends on the analysis goal. Third, we study aggregating the information of cell type marker genes when the aim is to predict the abundance of cell types in a tissue sample based on gene expression data ("expression deconvolution"). We apply different collapsing methods to predict cell type abundances in peripheral human blood and in mixtures of blood cell lines. Interestingly, the most accurate prediction method involves choosing the most highly connected "hub" marker gene. Finally, to facilitate biological interpretation of collapsed gene lists, we introduce the function userListEnrichment, which assesses the enrichment of gene lists for known brain and blood cell type markers, and for other published biological pathways. CONCLUSIONS: The R function collapseRows implements several standard and network-based collapsing methods. In various genomic applications we provide evidence that both types of methods are robust and biologically relevant tools.

Chang et al. (2013) Meta-analysis methods for combining multiple expression profiles: comparisons, statistical characterization and an application guideline. BMC Bioinformatics 14:368. (pmid: 24359104)

PubMed ] [ DOI ] BACKGROUND: As high-throughput genomic technologies become accurate and affordable, an increasing number of data sets have been accumulated in the public domain and genomic information integration and meta-analysis have become routine in biomedical research. In this paper, we focus on microarray meta-analysis, where multiple microarray studies with relevant biological hypotheses are combined in order to improve candidate marker detection. Many methods have been developed and applied in the literature, but their performance and properties have only been minimally investigated. There is currently no clear conclusion or guideline as to the proper choice of a meta-analysis method given an application; the decision essentially requires both statistical and biological considerations. RESULTS: We performed 12 microarray meta-analysis methods for combining multiple simulated expression profiles, and such methods can be categorized for different hypothesis setting purposes: (1) HS(A): DE genes with non-zero effect sizes in all studies, (2) HS(B): DE genes with non-zero effect sizes in one or more studies and (3) HS(r): DE gene with non-zero effect in "majority" of studies. We then performed a comprehensive comparative analysis through six large-scale real applications using four quantitative statistical evaluation criteria: detection capability, biological association, stability and robustness. We elucidated hypothesis settings behind the methods and further apply multi-dimensional scaling (MDS) and an entropy measure to characterize the meta-analysis methods and data structure, respectively. CONCLUSIONS: The aggregated results from the simulation study categorized the 12 methods into three hypothesis settings (HS(A), HS(B), and HS(r)). Evaluation in real data and results from MDS and entropy analyses provided an insightful and practical guideline to the choice of the most suitable method in a given application. All source files for simulation and real data are available on the author's publication website.

Thompson et al. (2016) Cross-platform normalization of microarray and RNA-seq data for machine learning applications. PeerJ 4:e1621. (pmid: 26844019)

PubMed ] [ DOI ] Large, publicly available gene expression datasets are often analyzed with the aid of machine learning algorithms. Although RNA-seq is increasingly the technology of choice, a wealth of expression data already exist in the form of microarray data. If machine learning models built from legacy data can be applied to RNA-seq data, larger, more diverse training datasets can be created and validation can be performed on newly generated data. We developed Training Distribution Matching (TDM), which transforms RNA-seq data for use with models constructed from legacy platforms. We evaluated TDM, as well as quantile normalization, nonparanormal transformation, and a simple log 2 transformation, on both simulated and biological datasets of gene expression. Our evaluation included both supervised and unsupervised machine learning approaches. We found that TDM exhibited consistently strong performance across settings and that quantile normalization also performed well in many circumstances. We also provide a TDM package for the R programming language.


 
325C78 7097B8 9BACCF A8A5CC D7C0F0


 

Notes

  1. I call these activities Quiz sessions for brevity, however they are not quizzes in the usual sense, since they rely on self-evaluation and immediate feedback.
  2. It's practice!
  3. According to "Writing R Extensions": "The mandatory ‘Package’ field gives the name of the package. This should contain only (ASCII) letters, numbers and dot, have at least two characters and start with a letter and not end in a dot." Deviating from this will result in a package check error.
  4. Note: the repository absolutely must not contain any datafile of more than 1Mb in size! Rather it must contain clear instructions how to download the data. Packages that violate the size limitations will not be evaluated. The code you write shall expect the data in a sister-directory of your working directory which is called data. For example, if I were to store a datafile by the name STRING_90.dat, my code would construct the path to it in a platform independent way as file.path("..", "data", "STRING_90.dat").
  5. Note: late-penalties apply.