BIO Assignment 3 2011

   

Assignment 3 - Multiple Sequence Alignment

Please note: This assignment is currently inactive. Unannounced changes may be made at any time.  

 

Introduction

A careful multiple sequence alignment is a cornerstone for the annotation of a gene or protein...

Preparation, submission and due date

Read carefully. Be sure you have understood all parts of the assignment and cover all questions in your answers! Sadly, we always get assignments back in which people have simply overlooked crucial questions. Sadly, we always get assignments back in which people have not described procedural details. If you did not notice that the above were two different sentences, you are still not reading carefully enough.

Prepare a Microsoft Word document with a title page that contains:

• your full name
• your Student ID
• your e-mail address
• the organism name you have been assigned (see below)

Follow the steps outlined below. You are encouraged to write your answers in short answer form or point form, like you would document an analysis in a laboratory notebook. However, you must

• document what you have done,
• note what Web sites and tools you have used,
• paste important data sequences, alignments, information etc.

If you do not document the process of your work, we will deduct marks. Try to be concise, not wordy! Use your judgement: are you giving us enough information so we could exactly reproduce what you have done? If not, we will deduct marks. Avoid RTF and unnecessary formating. Do not paste screendumps. Keep the size of your submission below 1.5 MB.

Write your answers into separate paragraphs and give each its title. Save your document with a filename of: A3_family name.given name.doc (for example my first assignment would be named: A3_steipe.boris.doc - and don't switch the order of your given name and familyname please!)

Finally e-mail the document to [boris.steipe@utoronto.ca] before the due date.

Your document must not contain macros. Please turn off and/or remove all macros from your Word document; we will disable macros, since they pose a security risk.

With the number of students in the course, we have to economize on processing the assignments. Thus we will not accept assignments that are not prepared as described above. If you have technical difficulties, contact me.

The due date for the assignment is XXXXX at 10:00 in the morning.

Grading

Don't wait until the last day to find out there are problems! Assignments that are received past the due date will have one mark deducted at the first minute of every twelve hour period past the due date. Assignments received more than 5 days past the due date will not be assessed.

Marks are noted below in the section headings for of the tasks. A total of 10 marks will be awarded, if your assignment answers all of the questions. A total of 2 bonus marks (up to a maximum of 10 overall) can be awarded for particularily interesting findings, or insightful comments. A total of 2 marks can be subtracted for lack of form or for glaring errors. The marks you receive will

• count directly towards your final marks at the end of term, for BCH441 (undergraduates), or
• be divided by two for BCH1441 (graduates).

   

Retrieve

   

In Assignment 2 you had retrieved the Saccharomyces cerevisiae Mbp1 protein sequence. Here I have compiled the most similar homologues from the organisms you have studied:

Mbp1 homologues

 

Our first task is to compile a multi-FASTA file for all Mbp1 orthologues.

In your second assignments, you used BLAST to find the best matches to the yeast Mbp1 protein in your assigned organism's genome. Since there was some variation in the sequences you reported, I have generated a list de novo using the following procedure:

1. Retrieved the Mbp1 protein sequence by searching Entrez for Mbp1 AND "saccharomyces cerevisiae"[organism]
2. Clicked on the RefSeq tab to find the RefSeq ID "NP_010227"
3. Accessed the BLAST form for protein/protein BLAST and paste the RefSeq ID into the query field. Choose refseq as the database. Keep default parameters. Choose Fungi as an ENTREZ query limit in the Options section.
4. On the results page, checked the checkbox next to the alignment of the most significant hit from each of the organisms we are studying.
5. Clicked on the "Get selected sequences" button. The results page lists the gene that is most similar to Mbp1 in each organism.
6. Verified that each of these sequences finds Mbp1 as the best match in the saccharomyces cerevisiae genome by clicking on each "BLink" (click for example) in the retrieved list. Scrolled down the list to confirm that the top hit of a saccharomyces cerevisiae protein is Mbp1.
7. Obtained UniProt accessionsfor all sequences, with a single query using the new UniProt ID mapping service. This service accepts a comma delimited list of RefSeq IDs and returns a list of Uniprot proteins.
8. Assembled this information into a table.

Organism	CODE	GI	Refseq	Uniprot Accession	Most similar yeast gene
Aspergillus fumigatus	ASPFU	70986922	XP_748947	Q4WGN2	Mbp1
Aspergillus nidulans	ASPNI	67525393	XP_660758	Q5B8H6	Mbp1
Aspergillus terreus	ASPTE	115391425	XP_001213217	Q0CQJ5	Mbp1
Candida albicans	CANAL	68465419	XP_723071	Q5ANP5	Mbp1
Candida glabrata	CANGL	50286059	XP_445458	Q6FWD6	Mbp1
Cryptococcus neoformans	CRYNE	58266778	XP_570545	Q5KHS0	Mbp1
Debaryomyces hansenii	DEBHA	50420495	XP_458784	Q6BSN6	Mbp1
Eremothecium gossypii	EREGO	45199118	NP_986147	Q752H3	Mbp1
Gibberella zeae	GIBZE	46116756	XP_384396	Q4IEY8	Mbp1
Kluyveromyces lactis	KLULA	50308375	XP_454189	P39679	Mbp1
Magnaporthe grisea	MAGGR	39964664	XP_365024	ACC	Mbp1*
Neurospora crassa	NEUCR	85109541	XP_962967	Q7SBG9	Mbp1
Saccharomyces cerevisiae	SACCE	6320147	NP_010227	P39678	Mbp1
Schizosaccharomyces pombe	SCHPO	19113944	NP_593032	P41412	Mbp1
Ustilago maydis	USTMA	71024227	XP_762343	Q4P117	Mbp1
Yarrowia lipolytica	YARLI	50545439	XP_500257	Q6CGF5	Mbp1

* Note: This is a full-length homologue, however the C-terminal half is more similar to Swi6 than to Mbp1.

 

• Download all sequences, generate a multi-Fasta file and save it to your computer. Don't submit the file but do record how you created it. (1 mark)
  

Hint: don't do this by hand, you can get the sequences all at once. Click here if you don't know how.

 

 

• Briefly explain if these sequences appear to be orthologues to yeast Mbp1 (as evidenced through the "reciprocal best-match" criterium). Briefly explain if these sequences are necessarily orthologues to each other. (1 mark)

 

Other ASPES domain sequences

 

Mbp1 orthologues are not the only proteins that contain APSES domains. In order to find all the rest, a PSI BLAST search was performed using the yeast Mbp1 APSES domain as query. From the list of hits, the APSES domains were extracted and summarized in a file.

 

• Review the resulting file for the APSES domains and make sure you understand the procedure that led to it. Summarize the key steps of the procedure in point form. (1 mark)

 

Orthologues

 

Determine for the APSES domains in your organism which yeast APSES domains they are orthologous to.

 

• Task

 

Instruction

 

• Task.

Align

   

Aligning the Mbp1 proteins (X marks)

 

Instruction

 

• Task.

   

Aligning the APSES domain (X marks)

 

• A CLUSTAL-W alignment
• A probcons alignment
• A PSI-BLAST alignment

Instruction

 

• Compare the three alignments

   

Analyse

   

SUB section Heading (X marks)

 

Instruction

 

• Task

 

Instruction

 

• Task.

   

[End of assignment]

If you have any questions at all, don't hesitate to mail me at boris.steipe@utoronto.ca or post your question to the Course Mailing List