BIO Assignment 3 2011

Note! This assignment is currently inactive. Major and minor unannounced changes may be made at any time.

 

 

   

Assignment 3 - Multiple Sequence Alignment

Please note: This assignment is currently inactive. Unannounced changes may be made at any time.  

Introduction

A carefully done multiple sequence alignment (MSA) is a cornerstone for the annotation of a gene or protein. MSAs combine the information from several related proteins, allowing us to study their essential, shared and conserved properties. They are useful to resolve ambiguities in the precise placement of gaps and to ensure that columns in alignments actually contain amino acids that evolve in a similar context. Therefore we need MSAs as input for

• protein homology modeling,
• phylogenetic analyses, and
• sensitive homology searches in databases.

Furthermore conservation - or the lack of conservation - reflects the requirements of structural or functional features of our protein, emphasizes domain boundaries in multi-domain proteins and it can guide mutations for protein engineering and design.

Given the ubiquitous importance of this procedure, it is somewhat surprising that by far the most frequently used algorithm is CLUSTAL, which has been shown to be significantly inferior to more modern approaches for sequences with about 30% identity or less.

In this assignment we will explore MSAs of the Mbp1 proteins and the APSES domains they contain and discuss several approaches to alignment:

• A model-based approach (based on the PSSM that PSI-BLAST generates)
• A progressive alignment - the CLUSTAL algorithm
• A consistency based alignment - T-Coffee resp. Probcons

Preparation, submission and due date

Please read carefully. Be sure you have understood all parts of the assignment and cover all questions in your answers! Sadly, we always get assignments back in which people have simply overlooked crucial questions. Sadly, we always get assignments back in which people have not described procedural details. If you did not notice that the above were two different sentences, you are still not reading carefully enough.

Prepare a Microsoft Word document with a title page that contains:

• your full name
• your Student ID
• your e-mail address
• the organism name you have been assigned

Follow the steps outlined below. You are encouraged to write your answers in short answer form or point form, like you would document an analysis in a laboratory notebook. However, you must

• document what you have done,
• note what Web sites and tools you have used,
• paste important data sequences, alignments, information etc.

If you do not document the process of your work, we will deduct marks. Try to be concise, not wordy! Use your judgement: are you giving us enough information so we could exactly reproduce what you have done? If not, we will deduct marks. Avoid RTF and unnecessary formating. Do not paste screendumps. Keep the size of your submission below 1.5 MB.

Write your answers into separate paragraphs and give each its title. Save your document with a filename of: A3_family name.given name.doc (for example my submission would be named: A3_steipe.boris.doc - and don't switch the order of your given name and family name please!)

Finally e-mail the document to boris.steipe@utoronto.ca before the due date.

Your document must not contain macros. Please turn off and/or remove all macros from your Word document; we will disable macros, since they pose a security risk.

With the number of students in the course, we have to economize on processing the assignments. Thus we will not accept assignments that are not prepared as described above. If you have technical difficulties, contact me.

The due date for the assignment is Thursday, December 7. at 24:00 (last day of class). In case you need more time since the assignment was posted late, an extension is automatically granted to Friday, December 8. at 10:00 in the morning.

Grading

Don't wait until the last day to find out there are problems! Assignments that are received past the due date will have one mark deducted and an additional mark for every full twelve hour period past the due date. Assignments received more than 5 days past the due date will not be assessed. If you need an extension, you must arrange this beforehand.

Marks are noted below in the section headings for of the tasks. A total of 10 marks will be awarded, if your assignment answers all of the questions. A total of 2 bonus marks (up to a maximum of 10 overall) can be awarded for particularily interesting findings, or insightful comments. A total of 2 marks can be subtracted for lack of form or for glaring errors. The marks you receive will

• count directly towards your final marks at the end of term, for BCH441 (undergraduates), or
• be divided by two for BCH1441 (graduates).

   

(1) Retrieve

   

In Assignment 2 you retrieved the saccharomyces cerevisiae Mbp1 protein sequence. Our first task is to compile a multi-FASTA file for all Mbp1 orthologues. First we need to define which sequences we are talking about. Then we need to retrieve them from the database.

 

(1.1) Mbp1 orthologues (1 mark)

 

In your second assignments, you used BLAST to find the best matches to the yeast Mbp1 protein in your assigned organism's genome. Since there was some variation in the sequences you reported, I have generated a list de novo using the following procedure:

1. Retrieved the Mbp1 protein sequence by searching Entrez for Mbp1 AND "saccharomyces cerevisiae"[organism]
2. Clicked on the RefSeq tab to find the RefSeq ID "NP_010227"
3. Accessed the BLAST form for protein/protein BLAST and pasted the RefSeq ID into the query field. Chose refseq as the database to search in, from the drop-down menu. Kept default parameters but turned Filter off. Chose Fungi as an ENTREZ query limit in the Options section.
4. On the results page, checked the checkbox next to the alignment of the most significant hit from each of the organisms we are studying.
5. Clicked on the "Get selected sequences" button. The results page lists the gene that is most similar to Mbp1 in each organism.
6. Verified that each of these sequences finds Mbp1 as the best match in the saccharomyces cerevisiae genome by clicking on each "BLink" (click for example) in the retrieved list. Scrolled down the list to confirm that the top hit of a saccharomyces cerevisiae protein is indeed Mbp1 (NP_010227).
7. Obtained UniProt accessions for all sequences, with a single query using the new UniProt ID mapping service. This service accepts a comma delimited list of RefSeq IDs and returns a list of Uniprot proteins.
8. Assembled this information into the following table.

Organism	CODE	GI	Refseq	Uniprot Accession	Most similar yeast gene
Aspergillus fumigatus	ASPFU	70986922	XP_748947	Q4WGN2	Mbp1
Aspergillus nidulans	ASPNI	67525393	XP_660758	Q5B8H6	Mbp1
Aspergillus terreus	ASPTE	115391425	XP_001213217	Q0CQJ5	Mbp1
Candida albicans	CANAL	68465419	XP_723071	Q5ANP5	Mbp1
Candida glabrata	CANGL	50286059	XP_445458	Q6FWD6	Mbp1
Cryptococcus neoformans	CRYNE	58266778	XP_570545	Q5KHS0	Mbp1
Debaryomyces hansenii	DEBHA	50420495	XP_458784	Q6BSN6	Mbp1
Eremothecium gossypii	EREGO	45199118	NP_986147	Q752H3	Mbp1
Gibberella zeae	GIBZE	46116756	XP_384396	Q4IEY8	Mbp1
Kluyveromyces lactis	KLULA	50308375	XP_454189	P39679	Mbp1
Magnaporthe grisea	MAGGR	39964664	XP_365024	ACC	Mbp1*
Neurospora crassa	NEUCR	85109541	XP_962967	Q7SBG9	Mbp1
Saccharomyces cerevisiae	SACCE	6320147	NP_010227	P39678	Mbp1
Schizosaccharomyces pombe	SCHPO	19113944	NP_593032	P41412	Mbp1
Ustilago maydis	USTMA	71024227	XP_762343	Q4P117	Mbp1
Yarrowia lipolytica	YARLI	50545439	XP_500257	Q6CGF5	Mbp1

* Note: This is a full-length homologue, however BLink shows that the C-terminal half is more similar to Swi6 than to Mbp1. Thus I would consider the ASPES domain orthologous, the remainder possibly paralogous.

 
Our second task is to obtain all FASTA sequences based on a list of identifiers and to save them in a format in which we can use them as input for other programs or services.  

 

• From the information given here, briefly explain if the sequences listed above appear to be orthologues to yeast Mbp1 (as evidenced through the "reciprocal best-match" criterium). Briefly explain if these sequences are necessarily also orthologues to each other.

• Review the resulting multi-FASTA file for the all Mbp1 proteins (linked here) and make sure you understand the procedure that led to it. Summarize the key steps of the procedure in point form. (Don't submit the entire file of course but make sure you understand (and could reproduce) the essential parts of the procedure). (1 mark)
  

 

(1.2) Other APSES domain sequences (1 mark)

 

Mbp1 orthologues are not the only proteins that contain APSES domains. In order to find all the rest, a PSI BLAST search was performed using the yeast Mbp1 APSES domain as query. From the list of hits, the APSES domains were extracted and summarized in a file.

 

• Review the resulting file for the APSES domains and make sure you understand the procedure that led to it. Summarize the key steps of the procedure in point form. (1 mark)

 

(1.3) Orthologues (1 mark)

 

For one of the the APSES domains in your organism, determine which yeast APSES domain (if any) it is orthologous to:

1. Choose at random one of the APSES domains from your organism (but not one labelled with Mbp1) and copy it's sequence into the input window of a BLAST search.
2. Restrict the BLAST search to RefSeq sequences in saccharomyces cerevisiae.
3. Run the search and determine the gene name of the best hit. (This is the best match.)
4. Find the sequence of your best hit's APSES domain in the sequence file. (Since the file contains all of them, your hit has to be in there, unless you found a non-RefSeq sequence).
5. Copy that sequence (i.e. use the exact sequence from the file, not only the possibly truncated sequence from the BLAST results alignment) and perform the same kind of BLAST search, this time restricted to your organism instead of yeast. (This finds the reciprocal match.)

 

• Document the process and report briefly what you have found on the forward and on the reverse search. Does the gene you have chosen fulfill the reciprocal best match criterium for orthology with a yeast gene? (1 mark)

 

(2) Align

   

Actually performing multiple sequence alignements used to involve downloading and installing software on your own computer. While most tools were available on the Web in principle, many groups have restricted the total number of sequences or the total number of characters to be aligned. The EBI however offers three of the most commonly used tools with few limitations and it was possible to run MSAs for all Mbp1 orthologues jointly.  

(2.1) Aligning the Mbp1 orthologues (1 mark)

 

I used the following three servers:

• CLUSTAL-W is a progressive alignment program, it is the most popular, most widely referenced MSA algorithm, it is reasonably fast and easy to use. But alignment errors that are made early can't get corrected and thus it is prone to misalignments on sets of sequences that have poor (<30% ID) local similarity. It is no longer considered state-of-the-art for carefully done alignments.
• MUSCLE essentially starts out from a CLUSTAL like alignment as a draft, then identifies similar groups of sequences from which it calculates profiles, it then re-aligns the group to the profile. This procedure is iterated.
• T-Coffee is one of my favourites - the tradeoffs appear to be especially well balanced. It too starts from a set of pairwise global alignments, like CLUSTAL, then additionally calculates sets of best local alignments. Global and local alignments are then combined to a similarity matrix and based on this matrix a guide-tree is constructed. This determines the order of steps in which sequences are added to the multiple alignment. A nice feature of T-Coffee is color coded output that allows you to quickly judge the local reliability of the alignment.

We shall perform multiple sequence alignments for all 16 Mbp1 orthologues and compare the results. Since the results should look the same for all of you, it was possible to precompute the alignments to save some resources. Of course you are welcome to do this on your own, but it is not required. In fact, since we want to compare the alignments, I have also edited them: I have re-sorted the results so that the sequences appear in the same order in each case. Only CLUSTAL provides the option to order the output in the same way as the input, the other two programs order the output so that adjacent sequences are most similar. This is useful, because it emphasizes sequence features, but it makes it impossibly tedious to compare alignments.

Assignment 3, Figure 01
The guide tree computed by CLUSTAL-W for the 16 Mbp1 orthologue sequences. This tree is based on a matrix of pairwise distances. Sequences in the multiple alignments have been rearranged into the same order as they apppear in this diagram.

The result files are linked here:

• Mbp1 proteins CLUSTAL aligned
• Mbp1 proteins MUSCLE aligned
• Mbp1 proteins T-Coffee aligned (text version) and (coloured according to scores)

Globally speaking, the alignments are quite similar. Let's first look at the common themes, before we discuss details of the results. The (score-colored T-COFFEE alignment) is well suited to look at general relationships between the sequences, since outliers can be easily identified. For example, if one of the sequences would have a low-scoring domain, aligning poorly to the others of the group, it may be possible that that domain has been acquired in a separate evolutionary event and is not homologous to all others. We would notice an isolated stretch of poorly alignable sequence, i.e. it should be coloured wihth a low score in a set of otherwise high-scoring segments. Also a gene may have acquired significant lengths of N- or C-terminal extensions which may not be homologous (unless they are the reuslt of an internal duplication).

 

• Review the (score-colored T-Coffee alignment). Based on this alignment, how do you feel about our initial assertion that these proteins should be considered orthologous? (Answer briefly, but with reference to specific evidence in the alignment. Note that this is not about the general level of conservation, but about whether significant segments do not appear related/alignable at all.) (1 mark)

   

(3) Mbp1 orthologues: analysis of full length MSAs

   

What do we mean by a good versus a poor multiple sequence alignment?

Let us first consider some of the features we have defined in the second assignment (and some structural features I have added). Here is an annotation of the yeast Mbp1 sequence. It was compiled with the following procedure.

1. Performed CDD search with yeast Mbp1 protein sequence. This retrieves alignments of Mbp1 with the APSES and the ANKYRIN domains. These are profile based alignment and I would consider them more reliable than pairwise alignments.
2. Performed SMART search with yeast Mbp1 protein sequence. This retrieved the APSES domain, annotated a number of low-complexity regions and a stretch of coiled coil.
3. Performed a SAS search with yeast Mbp1 protein sequence. This retrieved pairwise alignments with the structures 1MB1 (APSES) and chain D of 1IKN (ankyrin domains of I_kappab), together with their respectve secondary structure annotations.
4. Copied GenPept sequence into Word-processor.
5. Transferred annotations of low complexity and coiled-coil regions from SMART.
6. Transferred annotations of APSES seondary structure from SAS (this is a direct annotation, since the structure 1MB1 has the same sequence as the coressponding parts of the Mbp1 protein). The central helix of the binding region is slightly distorted and SAS annotates a break in the helix, this was bridged with lowercase "h" in the annotation.
7. Ankyrin domain annotation was not as straightforward. While CDD, SMART and SAS all annotate the same general regions, they disagree in details of the domain boundaries and in the precise alignment. Used the profile-based CDD alignment of 1IKN. Transferred annotations of secondary structure from SAS output for 1IKN to sequence (this is a transferred annotation, the original annotation was for 1IKN and we assume that it applies to Mbp1 as well).

MBP1_SACCE
Annotations based on 
- CDD domain analysis,
- SAS structure annotation and
- literature data on binding region

Keys:

C   Coiled coil regions predicted by Coils2 program
x   Low complexity region
*   Proposed binding region
+   positively charged residues, oriented for possible DNA binding interactions
-   negatively charged residues, oriented for possible DNA binding interactions

E   beta strand
H   alpha helix
t   beta turn


                  10         20         30         40         50         60 
          MSNQIYSARY SGVDVYEFIH STGSIMKRKK DDWVNATHIL KAANFAKAKR TRILEKEVLK
1MB1      ----EEEEEt t-EEEEEEEE t-EEEEEEtt ---EEHHHHH HH----HHHH HHHHhhhHHH
                                                               * *+**-+****

                  70         80         90        100        110        120 
          ETHEKVQGGF GKYQGTWVPL NIAKQLAEKF SVYDQLKPLF DFTQTDGSAS PPPAPKHHHA
1MB1      ---EEE---- tt--EEEE-H HHHHHHHHH- --HHHHtt-         xxx xxxxxxxxxx
          **+*+***** ****

                 130        140        150        160        170        180 
          SKVDRKKAIR SASTSAIMET KRNNKKAEEN QFQSSKILGN PTAAPRKRGR PVGSTRGSRR
          x                                                                           


                 190        200        210        220        230        240 
          KLGVNLQRSQ SDMGFPRPAI PNSSISTTQL PSIRSTMGPQ SPTLGILEEE RHDSRQQQPQ
                                                                      xxxxx


                 250        260        270        280        290        300 
          QNNSAQFKEI DLEDGLSSDV EPSQQLQQVF NQNTGFVPQQ QSSLIQTQQT ESMATSVSSS
          x                                        xx xxxxxxxxxx xxxxxxxxxx


                 310        320        330        340        350        360 
          PSLPTSPGDF ADSNPFEERF PGGGTSPIIS MIPRYPVTSR PQTSDINDKV NKYLSKLVDY
          xxxxxxx

                 370        380        390        400        410        420 
          FISNEMKSNK SLPQVLLHPP PHSAPYIDAP IDPELHTAFH WACSMGNLPI AEALYEAGTS
ANKYRIN                                 -- t----HHHHH HH---HHHHH t-t--t-t--


                 430        440        450        460        470        480 
          IRSTNSQGQT PLMRSSLFHN SYTRRTFPRI FQLLHETVFD IDSQSQTVIH HIVKRKSTTP
ANKYRIN   t----t---- HHHHHHHH-- -------HHH HHHHHH-ttH HH-----HHH HHHH--tH--


                 490        500        510        520        530        540 
          SAVYYLDVVL SKIKDFSPQY RIELLLNTQD KNGDTALHIA SKNGDVVFFN TLVKMGALTT
ANKYRIN   HHHHHHHHH- ---------- -----t---- tt---HHHHH HH---HHHHH HHH--t-tt-


                 550        560        570        580        590        600 
          ISNKEGLTAN EIMNQQYEQM MIQNGTNQHV NSSNTDLNIH VNTNNIETKN DVNSMVIMSP
ANKYRIN   ---t----HH HHHHHH--HH HHH-t--HHH -t----HHHH HHH--tHHHH HHHHHH---t


                 610        620        630        640        650        660 
          VSPSDYITYP SQIATNISRN IPNVVNSMKQ MASIYNDLHE QHDNEIKSLQ KTLKSISKTK
ANKYRIN   ---tt----H HHHHHH---H HHHHHHH      CCCCCCCC CCCCCCCCCC CCCCC


                 670        680        690        700        710        720 
          IQVSLKTLEV LKESSKDENG EAQTNDDFEI LSRLQEQNTK KLRKRLIRYK RLIKQKLEYR
                                                    x xxxxxxxxxx xxxxxxx

                 730        740        750        760        770        780 
          QTVLLNKLIE DETQATTNNT VEKDNNTLER LELAQELTML QLQRKNKLSS LVKKFEDNAK


                 790        800        810        820        830 
          IHKYRRIIRE GTEMNIEEVD SSLDVILQTL IANNNKNKGA EQIITISNAN SHA

A good MSA comprises only columns of residues that play similar roles in the proteins' mechanism and/or that evolve in a comparable structural context. Since it is a result of biological selection and conservation, it has relatively few indels and the indels it has are usually not placed into elements of secondary structure or into functional motifs.

A poor MSA has many errors in its columns in the sense that they contain residues that actuallly have diffferent functions or structural roles, even though they may look similar to a scoring matrix. It also may have introduced indels in biologically irrelevant positions, to maximize spurious sequence similarities.

In order to evaluate the MSAs for our proteins, we will analyze alignments relative to the features we have annotated above.  

(3.1) APSES domains (1 mark)

 

The APSES domains in all of our Mbp1 orthologues are highly conserved and a program that would misalign such obvius similarity would not be worth the electrons it computes with.

 

• Consider the CLUSTAL, Muscle and T-Coffee alignments of the Mbp1 orthologues. Orient yourselves as to where the APSES domains are located. Briefly note whether the three alignments agree and whether the charged residues in the proposed binding region are wholly or partially conserved. (Refer to the specific residues labelled (+) or (-) in the Mbp1 annotation above). (1 mark)

 

   

(3.2) Ankyrin domains (1 mark)

 

The Ankyrin domains are more highly diverged, the boundaries are less well defined and not even CDD, SMART and SAS agree on the precise annotations. Nevertheless we would hope that a good alignment would recognize homology in that region and that ideally the required indels would be placed between the secondary structure elements, not in their middle.

 

• For one of the alignments of your choice, identify the helices in the Ankyrin repeat region of Mbp1. To facilitate this, I have colored the annotated ankyrin helices red in the yeast Mbp1 protein. Briefly state whether the indels are concentrated in regions that connect the helices or if they are more or less evenly distributed along the entire region of similarity. Conclude whether the assertion that indels should not be placed in elelements of secondary structure has merit in this case, i.e. whether the indels that violate it have strong support from aligned sequence motifs. (1 mark)

 

   

(3.3) Other features (2 marks)

 

Aligning functional features like coiled coil domains or intrinsically disorderd regions is even more difficult, since this is to a large degree a property of the amino acid composition, not as much the precise sequence. Thus we would expect alignment algorithms to have difficulty to detect the correspondence between sequences in such regions. I have marked the four low complexity regions of the yeast Mbp1 sequence with bold letters in all three alignments.

 

• Copy the Mbp1 sequence from your organism from the multi-FASTA files and run a SMART sequence analysis: paste your sequence (or the Uniprot accession number), check only the checkbox for detecting intrinsic protein disorder and click "Sequence SMART". Locate the segments of low complexity for your sequence (they are in the lower part of the results page since they overlap with disordered segements). Find the corresponding positions for your sequence in one of the multiple sequence alignments. Briefly describe the situation: state whether these segments are found in the same general region, in the same detailed location, or perhaps even conserved in sequence, when you compare them to the saccharomyces cerevisiae sequence. (1 mark)

• Briefly discuss whether this observation should lead you to conclude that disorder in these proteins appears to be a conserved feature, i.e. that is selected for in evolution. (1 mark)

 
 

(4) APSES domain homologues: analysis of domain MSAs

 

The procedures for obtaining the MSAs for all APSES domains is summarized at the top of the page for each alignment. Read it and make sure you understand what has been done. Three approaches were used:

• An alignment based on the PSI-BLAST reults as an example of a profile-based alignment.

• A CLUSTAL-W alignment as an example of our standard, plain vanilla progressive alignment procedure.

• A consistency based, iterated alignment using probcons, as an example of the more modern methods. probcons was used rather than T-Coffee since the EBI server restricts the number of sequences it will accept to 50.

Comparing the three alignments, we note that they do not agree in detail over large stretches.    

(4.1) Manual improvement (1 mark)

Often errors or inconsistencies are easy to spot and manually editing an MSA is not generally frowned upon, even though this is not a strictly objective procedure. The main goal is to make an alignment biologically more plausible, usually this means to mimize the number of rare events that we need to postulate for the alignment: move indels into more appropriate positions and/or to emphasize conservation of known functional motifs. Here are some examples for what one might aim for in manually editing an alignment:

• Reduce number of indels

From Probcons:
0447_DEBHA    ILKTE-K-T---K--SVVK      ILKTE----KTK---SVVK
9978_GIBZE    MLGLN-PGLKEIT--HSIT      MLGLNPGLKEIT---HSIT
1513_CANAL    ILKTE-K-I---K--NVVK      ILKTE----KIK---NVVK
6132_SCHPO    ELDDI-I-ESGDY--ENVD      ELDDI-IESGDY---ENVD
1244_ASPFU    ----N-PGLREIC--HSIT  ->  ----NPGLREIC---HSIT
0925_USTMA    LVKTC-PALDPHI--TKLK      LVKTCPALDPHI---TKLK
2599_ASPTE    VLDAN-PGLREIS--HSIT      VLDANPGLREIS---HSIT
9773_DEBHA    LLESTPKQYHQHI--KRIR      LLESTPKQYHQHI--KRIR
0918_CANAL    LLESTPKEYQQYI--KRIR      LLESTPKEYQQYI--KRIR

Gaps marked in red were moved. The sequence similarity in the alignment does not change considerably, however the total number of indels in this excerpt is reduced to 13 from the original 22

• Move indels to more plausible position

From CLUSTAL:
4966_CANGL     MKHEKVQ------GGYGRFQ---GTW      MKHEKVQ------GGYGRFQ---GTW
1513_CANAL     KIKNVVK------VGSMNLK---GVW      KIKNVVK------VGSMNLK---GVW
6132_SCHPO     VDSKHP-----------QID---GVW  ->  VDSKHPQ-----------ID---GVW
1244_ASPFU     EICHSIT------GGALAAQ---GYW      EICHSIT------GGALAAQ---GYW

The two characters marked in red were swapped. This does not change the number of indels but places the "Q" into a a column in which it is more highly conserved (green). Progressive alignments are especially prone to this type of error.

• Conserve motifs

From CLUSTAL:
6166_SCHPO      --DKRVA---GLWVPP      --DKRVA--G-LWVPP
XBP1_SACCE      GGYIKIQ---GTWLPM      GGYIKIQ--G-TWLPM
6355_ASPTE      --DEIAG---NVWISP  ->  ---DEIA--GNVWISP
5262_KLULA      GGYIKIQ---GTWLPY      GGYIKIQ--G-TWLPY

The first of the two residues marked in red is a conserved, solvent exposed hydrophobic residue that may mediate domain interactions. The second residue is the conserved glycine in a beta turn that cannot be mutated without structural disruption. Changing the position of a gap and insertion in one sequence improves the conservation of both motifs.

   

Please consider the following excerpts from the alignments:

PSI-BLAST
MBP1_SACCE    SIMKRKKDDWVNATHILKA------A----------NFA--------KAKRTR-----
2599_ASPTE    -IMWDYNIGLVRTTPLFRS------Q----------NYS--------KTTPAK-----
9773_DEBHA    -IIWDYETGFVHLTGIWKA------S----------INDEVNTHRNLKADIVK-----
0918_CANAL    -VIWDYETGWVHLTGIWKA------SLTIDGSNVSPSHL--------KADIVK-----
9901_DEBHA    -ILRRVQDSYINISQLF--------SILLKIG----HLS--------EAQLTN-----
7766_ASPNI    -LMRRSKDGYVSATGMFKI------A-----------FP--------WAKLEEERSER
5459_GIBZE    -LMRRSYDGFVSATGMFKASFPYAEA----------SDE--------DAERKY-----
2267_NEUCR    -LMRRSQDGYISATGMFKA------TFPYASQ----EEE--------EAERKY-----
3510_ASPFU    -LMRRSKDGYVSATGMFKI------A-----------FP--------WAK--------
3762_MAGGR    -LMRRSSDGYVSATGMFKATFPYADA----------EDE--------EAERNY-----
3412_CANAL    -VLRRVQDSFVNVTQLFQI------LIKLE------VLP--------TSQVDN-----

CLUSTAL
MBP1_SACCE    SIMKRKKDDWVNATHILKAAN----------FAKAKRTRILE----------KEVLKETHE
2599_ASPTE    -IMWDYNIGLVRTTPLFRSQ----------NYSKTTPAKVLDAN--------P-GLREISH
9773_DEBHA    -IIWDYETGFVHLTGIWKASIN-DEVNTHR-NLKADIVKLLEST--------PKQYHQHIK
0918_CANAL    -VIWDYETGWVHLTGIWKASLTIDGSNVSPSHLKADIVKLLEST--------PKEYQQYIK
9901_DEBHA    -ILRRVQDSYINISQLFSILL----------KIGHLSEAQLTNFLNNEILTNTQYLSSGGS
7766_ASPNI    -LMRRSKDGYVSATGMFKIAF----------PWAKLEEERSE----------REYLKTRPE
5459_GIBZE    -LMRRSYDGFVSATGMFKASF----------PYAEASDEDAE----------RKYIKSLPT
2267_NEUCR    -LMRRSQDGYISATGMFKATF----------PYASQEEEEAE----------RKYIKSIPT
3510_ASPFU    -LMRRSKDGYVSATGMFKIAF----------PWAKLEEEKAE----------REYLKTREG
3762_MAGGR    -LMRRSSDGYVSATGMFKATF----------PYADAEDEEAE----------RNYIKSLPA
3412_CANAL    -VLRRVQDSFVNVTQLFQILI----------KLEVLPTSQVDNYFDNEILSNLKYFGSSSN

Probcons 
MBP1_SACCE    SIMKRKKDDWVNATHILKAANF----AKA----------KRTRILEKE-V-LKETH--E
2599_ASPTE    -IMWDYNIGLVRTTPLFRSQNY----SKT----------TPAKVLDAN-PGLREIS--H
9773_DEBHA    -IIWDYETGFVHLTGIWKASIN----DEV--NTHRNLKADIVKLLESTPKQYHQHI--K
0918_CANAL    -VIWDYETGWVHLTGIWKASLT----IDGSNVSPSHLKADIVKLLESTPKEYQQYI--K
9901_DEBHA    -ILRRVQDSYINISQLFSILLKIGHLSEA----------QLTNFLNNE-I-LTNTQYLS
7766_ASPNI    -LMRRSKDGYVSATGMFKIAFP----WAK----------LEEERSERE-Y-LK-----T
5459_GIBZE    -LMRRSYDGFVSATGMFKASFP----YAE----------ASDEDAERK-Y-IK-----S
2267_NEUCR    -LMRRSQDGYISATGMFKATFP----YAS----------QEEEEAERK-Y-IK-----S
3510_ASPFU    -LMRRSKDGYVSATGMFKIAFP----WAK----------LEEEKAERE-Y-LK-----T
3762_MAGGR    -LMRRSSDGYVSATGMFKATFP----YAD----------AEDEEAERN-Y-IK-----S
3412_CANAL    -VLRRVQDSFVNVTQLFQILIKLEVLPTS----------QVDNYFDNE-I-LSNLKYFG

 

• In any one of these excerpts, find at least one example where the alignment could be manually improved. Show the original version, the improved version and highlight the changes in red. (1 mark)

The fact that such improvements usually are not hard to find teaches us to be cautious with the results. Not in all cases will lack of conservation in a particular column mean that a residue has changed in evolution - sometimes this is simply a consequence of misalignment. MSAs can only take sequence information into account, while we may have additional information on structural and functional conservation patterns. This may include secondary structure (gaps should be moved out of regions of secondary structure, where possible), structurally required residues (expected to be conserved accross all structurally similar sequences) and functionally conserved residues (expected to have a high likelyhood of being conserved within groups of orthologues, but varying between orthologues and paralogues).

In terms of structural conservation, we expect motif or consistency based alignments to be more accurate since they align to the "big picture". In terms of functional variation we expect progressive alignments to be more accurate, since they align to local similarities.

   

(4.2) Residue conservation (1 mark)

 

Let us finally interpret the alignments in terms of their biological relevance. I have transferred the ligand-binding annotations for the yeast Mbp1 APSES domain into the multiple sequence alignments by color coding the charged residues that putatively could bind DNA red (-) and blue (+). Thus these residues label columns in which we expect functional conservation. I have labeled two residues that are associated with important structural features green. These two residues are G75, a mandatory glycine in the third position of a particular type of beta-turn, and W77, a key component of the domain's hydrophobic core. Thus these two residues label columns in which we expect structural conservation. Let's assume that all the APSES domains fold into similar structures and that they all bind DNA, although not necessarily the same cognate sequence. This should allow you to answer the following questions:

 

Consider any one of the three APSES domain MSAs.

• Are the patterns of sequence variation for functionally conserved residues compatible with different binding specificities for different APSES domains? State briefly (but with reference to specific residues) what you would expect and what you find.

• Are the patterns of sequence variation for structurally conserved residues compatible with a common fold of different APSES domains? State briefly (but with reference to specific residues) what you would expect and what you find. (1 mark)

   

(5) Summary of Resources

 

Links

• Assigned Organisms
• BLAST
• Uniprot ID mapping service
• A BLink example
• EBI CLUSTAL-W server
• EBI MUSCLE server
• EBI T-Coffee server
• CDD
• SMART
• SAS

Sequences

• All Mbp1 proteins
• All APSES domains

Alignments

Mbp1 proteins:

• Mbp1 proteins CLUSTAL aligned
• Mbp1 proteins MUSCLE aligned
• Mbp1 proteins T-Coffee aligned (text version)
• Mbp1 proteins T-Coffee aligned (coloured according to scores)

APSES domains:

• All APSES domains - alignment based on PSI-BLAST results
• All APSES domains - CLUSTAL-W alignment
• All APSES domains - probcons alignment

   

[End of assignment]

If you have any questions at all, don't hesitate to mail me at boris.steipe@utoronto.ca or post your question to the Course Mailing List