User:Boris/Temp/APB

Note! This assignment is currently inactive. Major and minor unannounced changes may be made at any time.

 

 

   

Assignment 3 - Multiple Sequence Alignment

Please note: This assignment is currently inactive. Unannounced changes may be made at any time.  

Introduction  

Take care of things, and they will take care of you.

Shunryu Suzuki

A carefully done multiple sequence alignment (MSA) is a cornerstone for the annotation of a gene or protein. MSAs combine the information from several related proteins, allowing us to study their essential, shared and conserved properties. They are useful to resolve ambiguities in the precise placement of gaps and to ensure that columns in alignments actually contain amino acids that evolve in a similar context. Therefore we need MSAs as input for

• protein homology modeling,
• phylogenetic analyses, and
• sensitive homology searches in databases.

In addition, conservation - or the lack of conservation - is a consequence of selection under the constraints imposed by the structural or functional features of a protein. Conservation patterns emphasize domain boundaries in multi-domain proteins, and amino acid propensities are powerful predictors for protein engineering and design.

Given the ubiquitous importance of multiple sequence alignment, it is remarkable that by far the most frequently used algorithm is CLUSTAL, a procedure that was first published for the microprocessors of the late 1980s, surpassed in performance many times and shown to be significantly inferior to more modern approaches for sequences with about 30% identity or less.

In this assignment we will explore MSAs of fungal proteins that are orthologous to yeast Mbp1, and of the APSES domains they contain, and compare several approaches to alignment:

• A model-based approach (based on the PSSM that PSI-BLAST generates)
• A progressive alignment - the CLUSTAL algorithm
• A consistency based alignment - T-Coffee, MUSCLE or Probcons

Preparation, submission and due date

Please read carefully. Be sure you have understood all parts of the assignment and cover all questions in your answers! Sadly, we always get assignments back in which people have simply overlooked crucial questions. Sadly, we always get assignments back in which people have not described procedural details. If you did not notice that the above were two different sentences, you are still not reading carefully enough.

Prepare a Microsoft Word document with a title page that contains:

• your full name
• your Student ID
• your e-mail address
• the organism name you have been assigned

Follow the steps outlined below. You are encouraged to write your answers in short answer form or point form, like you would document an analysis in a laboratory notebook. However, you must

• document what you have done,
• note what Web sites and tools you have used,
• paste important data sequences, alignments, information etc.

If you do not document the process of your work, we will deduct marks. Try to be concise, not wordy! Use your judgement: are you giving us enough information so we could exactly reproduce what you have done? If not, we will deduct marks. Avoid RTF and unnecessary formating. Do not paste screendumps or other uncompressed images. The size of your submission must remain below 1.5 MB.

Write your answers into separate paragraphs and give each its title. Save your document with a filename of: A3_family name.given name.doc (for example my submission would be named: A3_steipe.boris.doc - and don't switch the order of your given name and family name please!)

Finally e-mail the document to boris.steipe@utoronto.ca before the due date.

Your document must not contain macros. Please turn off and/or remove all macros from your Word document; we will disable macros, since they pose a security risk.

With the number of students in the course, we have to economize on processing the assignments. Thus we will not accept assignments that are not prepared as described above. If you have technical difficulties, contact the course coordinator.

The due date for the assignment is Monday, October 22. at 10:00.

Grading

Don't wait until the last day to find out there are problems! Assignments that are received past the due date will have one mark deducted and an additional mark for every full twelve hour period past the due date. Assignments received more than 5 days past the due date will not be assessed. If you need an extension, you must arrange this beforehand.

Marks are noted below in the section headings for of the tasks. A total of 10 marks will be awarded, if your assignment answers all of the questions. A total of 2 bonus marks (up to a maximum of 10 overall) can be awarded for particularily interesting findings, or insightful comments. A total of 2 marks can be subtracted for lack of form or for glaring errors. The marks you receive will

• count directly towards your final marks at the end of term, for BCH441 (undergraduates), or
• be divided by two for BCH1441 (graduates).

   

(1) Retrieve

   

In Assignment 2 you retrieved the protein sequences of saccharomyces cerevisiae Mbp1 and its orthologue in your assigned organism. In order to produce a multiple sequence alignment, we have to define which sequences we wish to use. Then we need to retrieve the sequences from the database. Finally we have to store the sequences in a format that we can use as input for the alignment programs.

(1.1) Input data for multiple alignments (1 mark)

 

In your second assignments, you used BLAST to find the best matches to the yeast Mbp1 protein in your assigned organism's genome. To avoid ambiguity, I have generated a reference list of these homologues using the canonical procedure defined below. Note that several departures from the procedure were necessary, as explained below the table; I consider these variations quite normal for a database query. You need to be familiar with such exceptions and how to deal with them.

1. Retrieved the Mbp1 protein sequence by searching Entrez for Mbp1 AND "saccharomyces cerevisiae"[organism]
2. Clicked on the RefSeq tab to find the RefSeq ID "NP_010227"
3. Accessed the BLAST form, followed the link to the list of all genomic BLAST databases and clicked on the (B) icon, next to Fungi to navigate to the Fungi Genomic BLAST page.
4. Pasted "NP_010227" into the query field. Chose Protein for both Query and Database, kept default parameters but set the Filter option to none. Clicked on the check-box of each of the fungal species we have considered in the previous assignment. Run BLAST.
5. On the results page, checked the checkbox next to the alignment to select the most significant hit from each organism' we are studying.
6. Clicked on the "Get selected sequences" button.
7. Separately searched for sequences from organisms that were either not included in the lsit or for which no hits were reported. Verified all ambiguous cases, as explained in the notes below.
8. Verified that each of these sequences finds Mbp1 as the best match in the saccharomyces cerevisiae genome by clicking on each "BLink" (click for example) in the retrieved list. Scrolled down the list to confirm that the top hit of a saccharomyces cerevisiae protein is indeed Mbp1 (NP_010227).
9. Obtained UniProt accessions for all sequences, with a single query using the UniProt ID mapping service. This service accepts a comma delimited list of RefSeq IDs, GI numbers or GenPept accession numbers and returns a list of Uniprot accession numbers.

Since it was thus confirmed that each of these sequences is the protein that is most similar to yeast Mbp1 in its respective organism's genome, and that yeast Mbp1 is the most similar yeast protein to each of them, the all fulfil the criterion of a reciprocal best match with yeast Mbp1. Accordingly we can postulate that this list contains the fungal orthologues to Mbp1.

 
 

Mbp1 and its orthologues
Organism	CODE	GI	NCBI	Uniprot	Most similar yeast gene
Aspergillus fumigatus	ASPFU	70986922	XP_748947	Q4WGN2_ASPFU	Mbp1
Aspergillus nidulans	ASPNI	40739343	EAA58533	Q5AYB5_EMENI	Mbp1
Aspergillus terreus	ASPTE	115391425	XP_001213217	Q0CQJ5_ASPTN	Mbp1
Candida albicans	CANAL	46444933	EAL04204	Q5ANP5_CANAL	Mbp1
Candida glabrata	CANGL	50286059	XP_445458	Q6FWD6_CANGA	Mbp1
Coprinopsis cinerea	COPCI	116501415	EAU84310	N.A.	Mbp1
Cryptococcus neoformans	CRYNE	134110416	XP_776035	Q5KHS0_CRYNE	Mbp1
Debaryomyces hansenii	DEBHA	50420495	XP_458784	Q6BSN6_DEBHA	Mbp1
Eremothecium gossypii	EREGO	45199118	NP_986147	Q752H3_ASHGO	Mbp1
Gibberella zeae	GIBZE	46116756	XP_384396	UPI000023DBF3	Mbp1
Kluyveromyces lactis	KLULA	50308375	XP_454189	MBP1_KLULA	Mbp1
Magnaporthe grisea	MAGGR	74274844	ABA02072	Q3S405_MAGGR	Mbp1*
Neurospora crassa	NEUCR	157070373	EAA33731	Q7SBG9	Mbp1
Pichia stipitis	PICST	149388844	EAZ62798	A3GHD6_PICST	Mbp1
Saccharomyces cerevisiae	SACCE	6320147	NP_010227	MBP1_YEAST	Mbp1
Schizosaccharomyces pombe	SCHPO	19113944	NP_593032	RES2_SCHPO	Mbp1
Ustilago maydis	USTMA	46101867	EAK87100	Q4P117_USTMA	Mbp1
Yarrowia lipolytica	YARLI	50545439	XP_500257	Q6CGF5_YARLI	Mbp1

Table of yeast Mbp1 orthologues in genome-sequenced fungi. Columns from left to right: Systematic name, organism code (simply a string that lets us identify the organism in alignments), GI number, RefSeq ID (if existing) or GenPept accession, Uniprot accession, most similar yeast protein.

Note: Coprinopsis cinerea accession numbers are not yet in UniProt.

Note: For Giberella zeae and Magnaporthe grisea, the protein BLAST search had to go through the entire nr database, by entering an organism restriction, since genomic BLAST was not enabled.

Note: For Giberella zeae XP_384396 no UniProt ID was returned as cross-reference. EBI-BLAST retrieved FG04220 which is largely identical, except for short stretches that are absent in GenPept: apparently UniProt has a different gene-model for this protein.

Note: The Neurospora crassa protein EAA33731 has no direct cross-reference in UniProt. The closest match is Q7SBG9 which is largely identical, except for short stretches that are absent in GenPept: apparently UniProt has a different gene-model for this protein.

Note: The Magnaporthe grisea protein ABA02072 has greater local C-terminal similarity to the yeast protein Swi6 than to Mbp1, whereas the N-terminal APSES domain is most similar to yeast Mbp1. However a global Needleman-Wunsch alignment (BLOSUM 30, gaps: 8.0/1.0) shows greater overall similarity to yeast Mbp1 than to Swi6. Accordingly I consider this an orthologue to Mbp1 even though its database annotation calls ABA02072 the M. grisea Swi6 homologue.

Note: For Pichia stipitis, BLAST finds two very similar sequences in GenPept as candidate Mbp1 orthologues; the RefSeq sequence XP_001386821.1 is translated according to the standard code, the EMBL generated entry EAZ62798.2 is translated according to the alternative nuclear code 12. The question had to be considered which translation appears to be correct. This requires looking at the conservation of the residues in question in the BAST alignment.

Note: The Ustilago maydis protein EAK87100 is only the second-best hit in the original BLAST list, however local optimal alignment (EMBOSS water) shows a much higher percentage of identity to yeast Mbp1 in the APSES domain than the top BLAST hit EAK86587 and global alignment (after trimming the N- and C- terminal extensions, respsectively) also shows a slightly higher degree of similarity for EAK87100 than EAK86587. Accordingly, EAK87100 is considered the Mbp1 orthologue, even though it is the second highest hit according to BLAST. This emphasizes the fact that optimal sequence alignments are not entirely equivalent to BLAST alignments.

 
Our second task is to obtain all FASTA sequences based on a list of identifiers and to save them in a format in which we can use them as input for other programs or services. This is easy: we simply paset all GI numbers as a comma separated list into the Entrez search form and select Display FASTA, send to Text on the results page, then save the contents as a Text file.  

 

• We have applied the "reciprocal best match criterion" to assert that these sequences are orthologues to yeast Mbp1 and this is how orthologues are commonly defined comnputationally. Briefly explain why this criterium will distinguish between orthologues and paralogues (when no genes have been lost). Consider at least the following three cases (i) a gene duplication has occurred before a speciation event, (ii) a gene duplication in the query organism has occurred after a speciation event. (iii) a gene duplication in the target organism has occurred after a speciation event. Use sketches to illustrate the cases. (1 mark)

• Review the resulting multi-FASTA file for the Mbp1 proteins (linked here) and make sure you understand the procedure that led to it. Depending on your personal learning style you may either carefully review the described procedure, reproduce key steps of the procedure, reproduce the entire procedure paying special attention to the problem cases discussed in the notes, or develop your own procedure. Whatever you do, you must be confident in the end that you could have produced the same input file.
  

 
Mbp1 orthologues are not the only proteins that contain APSES domains. In order to find all the rest, a PSI BLAST search was performed using the yeast Mbp1 APSES domain as query. From the list of hits, the APSES domains were extracted and summarized in a file.

 

• Review the resulting file for the APSES domains (linked here) and make sure you understand the procedure that was used in its construction, as above.

 

(1.2) Orthologues (1 mark)

 

For one of the the APSES domains from your assigned organism, determine whether it is orthologous to a yeast APSES domain:

1. Choose at random one of the APSES domains from your organism (but not one from an Mbp1 orthologue) and copy it's sequence into the input window of a genomic BLAST search against saccharomyces cerevisiae proteins.
2. Run the search and determine the gene name of the best hit. (This is the best match.)
3. The BLAST-retrieved sequence may be truncated on the results page and not cover the entire APSES domain: find the sequence of your best match in yeast in the sequence file. (Since the file contains all yeast APSES domains, your best match should be in this file, labeled with ????_SACCE.
4. Copy that sequence from the Wiki page and perform the same kind of BLAST search with this yeast sequence, against the proteins in your organism's genome. (This finds the reciprocal match.)

 

• Document the process and report briefly what you have found on the forward and on the reverse search. Does the gene you have chosen have an APSES domain that fulfils the reciprocal best match criterion for orthology with a yeast gene? (1 mark)

 

(2) Align

   

Actually performing multiple sequence alignements used to involve downloading and installing software on your own computer. While most tools were available on the Web in principle, many groups have restricted the total number of sequences or the total number of characters to be aligned. The EBI however offers three of the most commonly used tools with few limitations and it was possible to run MSAs for all Mbp1 orthologues jointly.  

(2.1) Aligning the Mbp1 orthologues (1 mark)

 

I used the following three servers:

• CLUSTAL-W is a progressive alignment program, it is the most popular, most widely referenced MSA algorithm, it is reasonably fast and easy to use. But alignment errors that are made early can't get corrected and thus it is prone to misalignments on sets of sequences that have poor (<30% ID) local similarity. It is no longer considered state-of-the-art for carefully done alignments.
• MUSCLE essentially starts out from a CLUSTAL like alignment as a draft, then identifies similar groups of sequences from which it calculates profiles, it then re-aligns the group to the profile. This procedure is iterated.
• T-Coffee is one of my favourites - the tradeoffs appear to be especially well balanced. It too starts from a set of pairwise global alignments, like CLUSTAL, then additionally calculates sets of best local alignments. Global and local alignments are then combined to a similarity matrix and based on this matrix a guide-tree is constructed. This determines the order of steps in which sequences are added to the multiple alignment. A nice feature of T-Coffee is color coded output that allows you to quickly judge the local reliability of the alignment.

We shall perform multiple sequence alignments for all 18 Mbp1 orthologues and compare the results. Since the results should look the same for all students in the class, I have simply prepared them for you. Of course you are welcome to do run an alignment on your own, but it is not required. The first alignment was run with CLUSTAL.

Assignment 3, Figure 01
The guide tree computed by CLUSTAL-W. The algorithm uses this tree to determine the best order for its progressive alignment for the 18 Mbp1 orthologue sequences. This tree is based on a matrix of pairwise distances.

Subseqently, sequence alignments were performed with T-Coffee and MUSCLE. However, the input files were re-ordered to corrspond to the order of the CLUSTAL output, and the option to order the alignments according to the input sequences was chosen on the form. This makes it much easier to compare alignments, since all sequences are displayed in the same relative order.

The result files are linked here:

• Mbp1 proteins CLUSTAL aligned
• Mbp1 proteins MUSCLE aligned
• Mbp1 proteins T-Coffee aligned (text version) and (coloured according to scores)

Globally speaking, the alignments are quite similar. Let's first look at the common themes, before we discuss details of the results. The (score-colored T-COFFEE alignment) is well suited to look at general relationships between the sequences, since outliers can be easily identified. For example, if one of the sequences would have a low-scoring domain that aligns poorly to the others of the group, it may be possible that that domain has been acquired in a separate evolutionary event and is not homologous to all others. We would notice an isolated stretch of poorly alignable sequence, i.e. it should be a segment coloured with a low score in a set of otherwise high-scoring segments. Also a gene may have acquired significant lengths of N- or C-terminal extensions which may not be homologous (unless they are the result of an internal duplication).

 

• Review the (score-colored T-COFFEE alignment). Based on this alignment, how do you feel about our initial assertion that these 18 proteins should be considered orthologous? (Answer briefly, but with reference to specific evidence in the alignment. Note that this question does not ask not about the general level of conservation, but about whether significant segments do not appear related/alignable at all.) (1 mark)

   

(3) Mbp1 orthologues: analysis of full length MSAs

   

What do we mean by a good versus a poor multiple sequence alignment?

Let us first consider some of the features we have defined in the second assignment (and some structural features I have compiled from various sources). Below, there is the yeast Mbp1 sequence with a number of annotations. It was compiled with the following procedure.

1. Performed CDD search with yeast Mbp1 protein sequence. This retrieves alignments of Mbp1 with the APSES and the ANKYRIN domains. These are profile based alignments and thus they are more reliable than pairwise alignments.
2. Performed SMART search with yeast Mbp1 protein sequence. This retrieved the APSES domain, annotated a number of low-complexity regions and a stretch of coiled coil.
3. Performed a SAS search with yeast Mbp1 protein sequence. This retrieved pairwise alignments with the structures 1MB1 (APSES) and chain D of 1IKN (ankyrin domains of I_kappab), together with their respective secondary structure annotations.
4. Copied GenPept sequence into Word-processor.
5. Transferred annotations of low complexity and coiled-coil regions from SMART.
6. Transferred annotations of APSES secondary structure from SAS (this is a direct annotation, since the experimentally determined structure 1MB1 is a fagment of of the Mbp1 protein). The central helix that was annotated to be part of the DNA binding region is slightly distorted and SAS annotates a break in the helix, this break was bridged with lowercase "h" in the annotation.
7. Ankyrin domain annotation was not as straightforward. While CDD, SMART and SAS all annotate the same general regions, they disagree in details of the domain boundaries and in the precise alignment. Used the profile-based CDD alignment of 1IKN. Transferred annotations of secondary structure from SAS output for 1IKN to sequence (this is a transferred annotation, the original annotation was for 1IKN and we assume that it applies to Mbp1 as well).

MBP1_SACCE
Annotations based on 
- CDD domain analysis,
- SAS structure annotation and
- literature data on binding region

Keys:

C   Coiled coil regions predicted by Coils2 program
x   Low complexity region
*   Proposed binding region
+   positively charged residues, oriented for possible DNA binding interactions
-   negatively charged residues, oriented for possible DNA binding interactions

E   beta strand
H   alpha helix
t   beta turn


                  10         20         30         40         50         60 
          MSNQIYSARY SGVDVYEFIH STGSIMKRKK DDWVNATHIL KAANFAKAKR TRILEKEVLK
1MB1      ----EEEEEt t-EEEEEEEE t-EEEEEEtt ---EEHHHHH HH----HHHH HHHHhhhHHH
                                                               * *+**-+****

                  70         80         90        100        110        120 
          ETHEKVQGGF GKYQGTWVPL NIAKQLAEKF SVYDQLKPLF DFTQTDGSAS PPPAPKHHHA
1MB1      ---EEE---- tt--EEEE-H HHHHHHHHH- --HHHHtt-         xxx xxxxxxxxxx
          **+*+***** ****

                 130        140        150        160        170        180 
          SKVDRKKAIR SASTSAIMET KRNNKKAEEN QFQSSKILGN PTAAPRKRGR PVGSTRGSRR
          x                                                                           


                 190        200        210        220        230        240 
          KLGVNLQRSQ SDMGFPRPAI PNSSISTTQL PSIRSTMGPQ SPTLGILEEE RHDSRQQQPQ
                                                                      xxxxx


                 250        260        270        280        290        300 
          QNNSAQFKEI DLEDGLSSDV EPSQQLQQVF NQNTGFVPQQ QSSLIQTQQT ESMATSVSSS
          x                                        xx xxxxxxxxxx xxxxxxxxxx


                 310        320        330        340        350        360 
          PSLPTSPGDF ADSNPFEERF PGGGTSPIIS MIPRYPVTSR PQTSDINDKV NKYLSKLVDY
          xxxxxxx

                 370        380        390        400        410        420 
          FISNEMKSNK SLPQVLLHPP PHSAPYIDAP IDPELHTAFH WACSMGNLPI AEALYEAGTS
ANKYRIN                                 -- t----HHHHH HH---HHHHH t-t--t-t--


                 430        440        450        460        470        480 
          IRSTNSQGQT PLMRSSLFHN SYTRRTFPRI FQLLHETVFD IDSQSQTVIH HIVKRKSTTP
ANKYRIN   t----t---- HHHHHHHH-- -------HHH HHHHHH-ttH HH-----HHH HHHH--tH--


                 490        500        510        520        530        540 
          SAVYYLDVVL SKIKDFSPQY RIELLLNTQD KNGDTALHIA SKNGDVVFFN TLVKMGALTT
ANKYRIN   HHHHHHHHH- ---------- -----t---- tt---HHHHH HH---HHHHH HHH--t-tt-


                 550        560        570        580        590        600 
          ISNKEGLTAN EIMNQQYEQM MIQNGTNQHV NSSNTDLNIH VNTNNIETKN DVNSMVIMSP
ANKYRIN   ---t----HH HHHHHH--HH HHH-t--HHH -t----HHHH HHH--tHHHH HHHHHH---t


                 610        620        630        640        650        660 
          VSPSDYITYP SQIATNISRN IPNVVNSMKQ MASIYNDLHE QHDNEIKSLQ KTLKSISKTK
ANKYRIN   ---tt----H HHHHHH---H HHHHHHH      CCCCCCCC CCCCCCCCCC CCCCC


                 670        680        690        700        710        720 
          IQVSLKTLEV LKESSKDENG EAQTNDDFEI LSRLQEQNTK KLRKRLIRYK RLIKQKLEYR
                                                    x xxxxxxxxxx xxxxxxx

                 730        740        750        760        770        780 
          QTVLLNKLIE DETQATTNNT VEKDNNTLER LELAQELTML QLQRKNKLSS LVKKFEDNAK


                 790        800        810        820        830 
          IHKYRRIIRE GTEMNIEEVD SSLDVILQTL IANNNKNKGA EQIITISNAN SHA

A good MSA comprises only columns of residues that play similar roles in the proteins' mechanism and/or that evolve in a comparable structural context. Since it is a result of biological selection and conservation, it has relatively few indels and the indels it has are usually not placed into elements of secondary structure or into functional motifs.

A poor MSA has many errors in its columns, they contain residues that actuallly have diffferent functions or structural roles, even though they may look similar to a scoring matrix. It also may have introduced indels in biologically irrelevant positions, to maximize spurious sequence similarities.

In order to evaluate the MSAs for our proteins, we will analyze alignments relative to the features we have annotated above.  

(3.1) APSES domains (1 mark)

 

The APSES domains in all of our Mbp1 orthologues are highly conserved and any program must be able to align such obviously similar regions.

 

• Consider the CLUSTAL, Muscle and T-Coffee alignments of the Mbp1 orthologues. Orient yourselves as to where the APSES domains are located. Briefly note whether the three alignments agree and whether the charged residues in the proposed binding region are wholly or partially conserved across all 18 proteins. (Refer to the specific residues labelled (+) or (-) in the Mbp1 annotation above). (1 mark)

 

   

(3.2) Ankyrin domains (1 mark)

 

The Ankyrin domains are more highly diverged, the boundaries are less well defined and not even CDD, SMART and SAS agree on the precise annotations. Nevertheless we would hope that a good alignment would recognize homology in that region and that ideally the required indels would be placed between the secondary structure elements, not in their middle.

 

• For one of the alignments of your choice (CLUSTAL, T-coffee or MUSCLE), identify the helices in the Ankyrin repeat region of Mbp1, based on the annotations given above. (This is probably easiest done by pasting that part of the alignment into a word-processor and highlighting the residues you are discussing). Briefly state whether the indels in his region are concentrated in segments that connect the helices, or if they are more or less evenly distributed along the entire region of similarity. Conclude whether the assertion that indels should not be placed in elements of secondary structure has merit in this case; in particular if you notice indels tha violate this rule-of-thumb, consider whether the location of the indel has strong support from aligned sequence motifs, or whether it could apparently be placed into a different location whithout much loss in alignment quality. Support your conclusions with specific reference to particular elements of the alignment. (1 mark)

 

   

(3.3) Other features (2 marks)

 

Aligning functional features like coiled coil domains or intrinsically disorderd regions is even more difficult, since this is to a large degree a property of the amino acid composition, not as much the precise sequence. Thus we would expect alignment algorithms to have difficulty to detect the correspondence between sequences in such regions. I have annotated four low complexity regions of the yeast Mbp1 sequence.

 

• Copy the Mbp1 sequence from your organism from the multi-FASTA files and run a SMART sequence analysis: paste your FASTA formatted sequence (or its Uniprot accession number), check only the checkbox for detecting intrinsic protein disorder and click "Sequence SMART". Locate the segments of low complexity for your sequence (they are in the lower part of the results page since they overlap with disordered segments). Now comment on one of the multiple sequence alignments: do the proteins have apparnetly similar low complexity regions, and have they been aligned byt the MSA algorithm.. Briefly describe the situation: state whether these segments are found in the same general region, in the same detailed location, or perhaps even conserved in sequence, when you compare them to the saccharomyces cerevisiae sequence. Backup your conclusions with specific reference to particular elements of the alignment. (1 mark)

• Briefly discuss whether this observation should lead you to conclude that disorder in these proteins appears to be a conserved feature, i.e. that is selected for in evolution. (1 mark)

 
 

(4) APSES domain homologues: analysis of domain MSAs

 

The procedures for obtaining the MSAs for all APSES domains is summarized at the top of the page for each alignment. Read it and make sure you understand what has been done. Three approaches were used:

• An alignment based on the PSI-BLAST reults as an example of a profile-based alignment.

• A CLUSTAL-W alignment as an example of our standard, plain vanilla progressive alignment procedure.

• A consistency based, iterated alignment using probcons, as an example of the more modern methods. probcons was used rather than T-Coffee since the EBI server restricts the number of sequences it will accept to 50.

Comparing the three alignments, we note that they do not agree in detail over large stretches.    

(4.1) Manual improvement (1 mark)

Often errors or inconsistencies are easy to spot and manually editing an MSA is not generally frowned upon, even though this is not a strictly objective procedure. The main goal is to make an alignment biologically more plausible, usually this means to mimize the number of rare events that we need to postulate for the alignment: move indels into more appropriate positions and/or to emphasize conservation of known functional motifs. Here are some examples for what one might aim for in manually editing an alignment:

• Reduce number of indels

From Probcons:
0447_DEBHA    ILKTE-K-T---K--SVVK      ILKTE----KTK---SVVK
9978_GIBZE    MLGLN-PGLKEIT--HSIT      MLGLNPGLKEIT---HSIT
1513_CANAL    ILKTE-K-I---K--NVVK      ILKTE----KIK---NVVK
6132_SCHPO    ELDDI-I-ESGDY--ENVD      ELDDI-IESGDY---ENVD
1244_ASPFU    ----N-PGLREIC--HSIT  ->  ----NPGLREIC---HSIT
0925_USTMA    LVKTC-PALDPHI--TKLK      LVKTCPALDPHI---TKLK
2599_ASPTE    VLDAN-PGLREIS--HSIT      VLDANPGLREIS---HSIT
9773_DEBHA    LLESTPKQYHQHI--KRIR      LLESTPKQYHQHI--KRIR
0918_CANAL    LLESTPKEYQQYI--KRIR      LLESTPKEYQQYI--KRIR

Gaps marked in red were moved. The sequence similarity in the alignment does not change considerably, however the total number of indels in this excerpt is reduced to 13 from the original 22

• Move indels to more plausible position

From CLUSTAL:
4966_CANGL     MKHEKVQ------GGYGRFQ---GTW      MKHEKVQ------GGYGRFQ---GTW
1513_CANAL     KIKNVVK------VGSMNLK---GVW      KIKNVVK------VGSMNLK---GVW
6132_SCHPO     VDSKHP-----------QID---GVW  ->  VDSKHPQ-----------ID---GVW
1244_ASPFU     EICHSIT------GGALAAQ---GYW      EICHSIT------GGALAAQ---GYW

The two characters marked in red were swapped. This does not change the number of indels but places the "Q" into a a column in which it is more highly conserved (green). Progressive alignments are especially prone to this type of error.

• Conserve motifs

From CLUSTAL:
6166_SCHPO      --DKRVA---GLWVPP      --DKRVA--G-LWVPP
XBP1_SACCE      GGYIKIQ---GTWLPM      GGYIKIQ--G-TWLPM
6355_ASPTE      --DEIAG---NVWISP  ->  ---DEIA--GNVWISP
5262_KLULA      GGYIKIQ---GTWLPY      GGYIKIQ--G-TWLPY

The first of the two residues marked in red is a conserved, solvent exposed hydrophobic residue that may mediate domain interactions. The second residue is the conserved glycine in a beta turn that cannot be mutated without structural disruption. Changing the position of a gap and insertion in one sequence improves the conservation of both motifs.

   

Please consider the following excerpts from the alignments:

PSI-BLAST
MBP1_SACCE    SIMKRKKDDWVNATHILKA------A----------NFA--------KAKRTR-----
2599_ASPTE    -IMWDYNIGLVRTTPLFRS------Q----------NYS--------KTTPAK-----
9773_DEBHA    -IIWDYETGFVHLTGIWKA------S----------INDEVNTHRNLKADIVK-----
0918_CANAL    -VIWDYETGWVHLTGIWKA------SLTIDGSNVSPSHL--------KADIVK-----
9901_DEBHA    -ILRRVQDSYINISQLF--------SILLKIG----HLS--------EAQLTN-----
7766_ASPNI    -LMRRSKDGYVSATGMFKI------A-----------FP--------WAKLEEERSER
5459_GIBZE    -LMRRSYDGFVSATGMFKASFPYAEA----------SDE--------DAERKY-----
2267_NEUCR    -LMRRSQDGYISATGMFKA------TFPYASQ----EEE--------EAERKY-----
3510_ASPFU    -LMRRSKDGYVSATGMFKI------A-----------FP--------WAK--------
3762_MAGGR    -LMRRSSDGYVSATGMFKATFPYADA----------EDE--------EAERNY-----
3412_CANAL    -VLRRVQDSFVNVTQLFQI------LIKLE------VLP--------TSQVDN-----

CLUSTAL
MBP1_SACCE    SIMKRKKDDWVNATHILKAAN----------FAKAKRTRILE----------KEVLKETHE
2599_ASPTE    -IMWDYNIGLVRTTPLFRSQ----------NYSKTTPAKVLDAN--------P-GLREISH
9773_DEBHA    -IIWDYETGFVHLTGIWKASIN-DEVNTHR-NLKADIVKLLEST--------PKQYHQHIK
0918_CANAL    -VIWDYETGWVHLTGIWKASLTIDGSNVSPSHLKADIVKLLEST--------PKEYQQYIK
9901_DEBHA    -ILRRVQDSYINISQLFSILL----------KIGHLSEAQLTNFLNNEILTNTQYLSSGGS
7766_ASPNI    -LMRRSKDGYVSATGMFKIAF----------PWAKLEEERSE----------REYLKTRPE
5459_GIBZE    -LMRRSYDGFVSATGMFKASF----------PYAEASDEDAE----------RKYIKSLPT
2267_NEUCR    -LMRRSQDGYISATGMFKATF----------PYASQEEEEAE----------RKYIKSIPT
3510_ASPFU    -LMRRSKDGYVSATGMFKIAF----------PWAKLEEEKAE----------REYLKTREG
3762_MAGGR    -LMRRSSDGYVSATGMFKATF----------PYADAEDEEAE----------RNYIKSLPA
3412_CANAL    -VLRRVQDSFVNVTQLFQILI----------KLEVLPTSQVDNYFDNEILSNLKYFGSSSN

Probcons 
MBP1_SACCE    SIMKRKKDDWVNATHILKAANF----AKA----------KRTRILEKE-V-LKETH--E
2599_ASPTE    -IMWDYNIGLVRTTPLFRSQNY----SKT----------TPAKVLDAN-PGLREIS--H
9773_DEBHA    -IIWDYETGFVHLTGIWKASIN----DEV--NTHRNLKADIVKLLESTPKQYHQHI--K
0918_CANAL    -VIWDYETGWVHLTGIWKASLT----IDGSNVSPSHLKADIVKLLESTPKEYQQYI--K
9901_DEBHA    -ILRRVQDSYINISQLFSILLKIGHLSEA----------QLTNFLNNE-I-LTNTQYLS
7766_ASPNI    -LMRRSKDGYVSATGMFKIAFP----WAK----------LEEERSERE-Y-LK-----T
5459_GIBZE    -LMRRSYDGFVSATGMFKASFP----YAE----------ASDEDAERK-Y-IK-----S
2267_NEUCR    -LMRRSQDGYISATGMFKATFP----YAS----------QEEEEAERK-Y-IK-----S
3510_ASPFU    -LMRRSKDGYVSATGMFKIAFP----WAK----------LEEEKAERE-Y-LK-----T
3762_MAGGR    -LMRRSSDGYVSATGMFKATFP----YAD----------AEDEEAERN-Y-IK-----S
3412_CANAL    -VLRRVQDSFVNVTQLFQILIKLEVLPTS----------QVDNYFDNE-I-LSNLKYFG

 

• In any one of these excerpts, find at least one example where the alignment could be manually improved. Show the original version, the improved version and highlight the changes in red. (1 mark)

The fact that such improvements usually are not hard to find teaches us to be cautious with the results. Not in all cases will lack of conservation in a particular column mean that a residue has changed in evolution - sometimes this is simply a consequence of misalignment. MSAs can only take sequence information into account, while we may have additional information on structural and functional conservation patterns. This may include secondary structure (gaps should be moved out of regions of secondary structure, where possible), structurally required residues (expected to be conserved accross all structurally similar sequences) and functionally conserved residues (expected to have a high likelyhood of being conserved within groups of orthologues, but varying between orthologues and paralogues).

In terms of structural conservation, we expect motif or consistency based alignments to be more accurate since they align to the "big picture". In terms of functional variation we expect progressive alignments to be more accurate, since they align to local similarities.

   

(4.2) Residue conservation (1 mark)

 

Let us finally interpret the alignments in terms of their biological relevance. I have transferred the ligand-binding annotations for the yeast Mbp1 APSES domain into the multiple sequence alignments by color coding the charged residues that putatively could bind DNA red (-) and blue (+). Thus these residues label columns in which we expect functional conservation. I have labeled two residues that are associated with important structural features green. These two residues are G75, a mandatory glycine in the third position of a particular type of beta-turn, and W77, a key component of the domain's hydrophobic core. Thus these two residues label columns in which we expect structural conservation. Let's assume that all the APSES domains fold into similar structures and that they all bind DNA, although not necessarily the same cognate sequence. This should allow you to answer the following questions:

 

Consider any one of the three APSES domain MSAs.

• Are the patterns of sequence variation for functionally conserved residues compatible with different binding specificities for different APSES domains? State briefly (but with reference to specific residues) what you would expect and what you find.

• Are the patterns of sequence variation for structurally conserved residues compatible with a common fold of different APSES domains? State briefly (but with reference to specific residues) what you would expect and what you find. (1 mark)

   

(5) Summary of Resources

 

Links

• Assigned Organisms
• BLAST
• Uniprot ID mapping service
• A BLink example
• EBI CLUSTAL-W server
• EBI MUSCLE server
• EBI T-Coffee server
• CDD
• SMART
• SAS

Sequences

• All Mbp1 proteins
• All APSES domains

Alignments

Mbp1 proteins:

• Mbp1 proteins CLUSTAL aligned
• Mbp1 proteins MUSCLE aligned
• Mbp1 proteins T-Coffee aligned (text version)
• Mbp1 proteins T-Coffee aligned (coloured according to scores)

APSES domains:

• All APSES domains - alignment based on PSI-BLAST results
• All APSES domains - CLUSTAL-W alignment
• All APSES domains - probcons alignment

   

[End of assignment]

If you have any questions at all, don't hesitate to mail me at boris.steipe@utoronto.ca or post your question to the Course Mailing List